802.11ac Switch/Low-Noise Amplifier Front-End
PRELIMINARY DATA SHEET
SKY85202-11: 2.4 GHz, 802.11ac Switch/Low-Noise Amplifier Front-End
Applications
WiFi-enabled ...
Description
PRELIMINARY DATA SHEET
SKY85202-11: 2.4 GHz, 802.11ac Switch/Low-Noise Amplifier Front-End
Applications
WiFi-enabled handsets, tablets, and mobile systems System-in-Package (SiP) modules for embedded systems 802.11n/ac smartphones and tablets
VBATT
BT
Features
Integrates an SP3T switch and LNA with bypass mode Receive gain: 14 dB Noise Figure: 2 dB Transmit/Bluetooth® path loss: 0.7 dB Small WLCSP (15-bump, 1.04 x 1.04 mm) package (MSL1, 260 °C per JEDEC-J-STD-020)
Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074.
ANT
LNA
RX
TX
CBT CTX CRX LEN
S3567
Figure 1. SKY85202-11 Block Diagram
Description
The SKY85202-11 integrates a Single-Pole, Triple-Throw (SP3T) switch and Low-Noise Amplifier (LNA) with a bypass mode in an ultra-compact package. The device is capable of switching between WLAN receive and WLAN transmit. The SKY85202-11 is provided in a small, 15-bump, 1.04 x 1.04 mm Wafer Level Chip Scale Package (WLCSP). A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.
1
ANT TX
14
13
12
GND VBATT
11 10
BT GND
GND
2
CBT
3
GS
9
CTX
4 5 6
VSS1
15
LEN CRX VSS2
7
RX
8
S3569
Figure 2. SKY85202-11 Pinout – 15-Bump WLCSP (Top View, Bumps Down)
Skyworks Solutions, Inc. Phone...
Similar Datasheet