Document
ZU SERIES DC/DC CONVERTER
ZUW6
R
Thin profile Isolated between input-output Built-in overcurrent protection circuit UL recognized, TÜV approved, CSA certified Five-year warranty
¡ ORDERING INFORMATION
ZUW61212
Output voltage Input voltage Output wattage Dual output Series name
SPECIFICATIONS
MODEL
VOLTAGE
INPUT
Output pins can be connected in seris to make a 24V/30V output.
ZUW60512
[V] [A]¶1 [%]¶1 [V] [A] [mV] [mV] [mVp-p ] 1.60 typ 75 typ 0.25 60max 600max 120max 150max 150max 50max FIXED
ZUW60515
1.60 typ 75 typ 0.20 75max 750max 120max 150max 180max 60max
ZUW61212
0.65 typ 77 typ 0.25 60max 600max 120max 150max 150max 50max
ZUW61215
0.65 typ 77 typ 0.20 75max 750max 120max 150max 180max 60max
ZUW62412
0.33 typ 77 typ 0.25 60max 600max 120max 150max 150max 50max
ZUW62415
0.33 typ 77 typ 0.20 75max 750max 120max 150max 180max 60max
ZUW64812
0.17 typ 77 typ 0.25 60max 600max 120max 150max 150max 50max
ZUW64815
0.17 typ 77 typ 0.20 75max 750max 120max 150max 180max 60max
DC4.5~9
DC9~18
DC18~36
DC36~72
CURRENT EFFICIENCY VOLTAGE CURRENT LINE REGULATION LOAD REGULATION RIPPLE ¶3
±12(+24) ±15(+30) ±12(+24) ±15(+30) ±12(+24) ±15(+30) ±12(+24) ±15(+30)
OUTPUT
RIPPLE NOISE ¶3 [mVp-p ]
TEMPERATURE REGULATION -20~+55˚C[mV]
ZU/ZT
DRIFT START-UP TIME
[mV]¶2 [ms] [V]
20max(Minimum input,lo =100 %)
PROTECTION CIRCUIT
OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING OVERCURRENT PROTECTION
[V] 11.40~12.60 14.25~15.75 11.40~12.60 14.25~15.75 11.40~12.60 14.25~15.75 11.40~12.60 14.25~15.75 Works over 105 % of rating and recovers automatically. AC500V, 1minute, Cutoff current=10mA, DC500V, 50MΩ min.(At Room Temperature) AC500V, 1minute, Cutoff current=10mA, DC500V, 50MΩ min.(At Room Temperature) AC500V, 1minute, Cutoff current=10mA, DC500V, 50MΩ min.(At Room Temperature) -20~+71ª, 20~95%RH(Non condensing)(Refer to DERATING CURVE) , 3,000m(10,000feet)max -40~+85ª, 20~95%RH (Non condensing), 9,000m(30,000feet)max 10~55Hz, 98.0m/s2(10G), 3 minutes period, 60 minutes each along X, Y and Z axis 490.3m/s2(50G), 11ms, once each X, Y and Z axis UL1950, EN60950, CSA C22.2 No.950 Complies with IEC60950
INPUT-OUTPUT
ISOLATION
INPUT-CASE OUTPUT-CASE
OPERATING TEMP., HUMID. AND ALTITUDE STORAGE TEMP., HUMID. AND ALTITUDE
ENVIRONMENT
VIBRATION IMPACT
SAFETY
AGENCY APPROVALS
¶1 Rated input 5V, 12V, 24V or 48V DC, Io=100%. ¶2 The drift is a change at 25ª of ambient temperature and 30 minutes~8 hours after the input voltage applied at rated input/output. ¶3 Measured by 20MHz oscilloscope. ¶ The output specification is at ±12V and ±15V. ¶ Series/Parallel operation with other model is not possible.
404
Free Datasheet http://www.datasheet4u.com/
DC/DC CONVERTER
(DUAL OUTPUT)
MODEL
MAX OUTPUT WATTAGE DC OUTPUT VOLTAGE DC OUTPUT CURRENT
0512
1212
¡EXTERNAL VIEW
ZUW6 2412 6W ±12V or +24V 0.25A
4812
0515
ZUW6 1215 2415 6W ±15V or +30V 0.20A
4815
¶Recomended size for processing PCB
(TOP VIEW)
Outline (1.25)
(1.25)
2-º1.6
15.24
6.35
(1.25) 25.4 38.1
(1.25)
The converter is in contact with the slanted area of the P.C.B. To keep isolation, adequate wiring on the ¶Dimensions in mm mounted side is required. ¶Div.: 0.1inch
¡STATIC CHARACTERISTICS (ZUW60515)
¡RISE TIME & FALL TIME (ZUW60515:+15V)
10.16
5-º1.5
20.32 27.94
ZU/ZT
¡OVERCURRENT CHARACTERISTICS (ZUW60515) ¡DERATING CURVE
405
Free Datasheet http://www.datasheet4u.com/
Basic characteristics data
Model Circuit method Switching Input Rated Inrush frequency current input fuse current [kHz] [A] protection PCB/Pattern Material Single sided Series/Parallel operation availability Double Series Parallel sided operation operation
ZUS1R5 ZUW1R5 Flyback ZTS1R5 converter ZTW1R5 ZUS3 ZUW3 ZTS3 ZTW3 ZUS6 ZUW6 ZUS10 ZUW10 ZUS15 ZUW15 ZUS25 ZUW25 Flyback converter Flyback converter Flyback converter
310~1600
-
glass fabric base, epoxy resin
Yes
*2
*2
200~1600 *1 150~1600 100~ 200 Refer to table No.1
-
glass fabric base, epoxy resin glass fabric base, epoxy resin glass fabric base, epoxy resin glass fabric base, epoxy resin glass fabric base, epoxy resin
Yes
*2
*2
-
Yes Yes Yes Yes
*2 Yes Yes Yes
*2 *2 *2 *2
Single ended 330~ 400 forward converter Single ended 330~ 400 forward converter
*1 Refer to Specification. *2 Refer to Instruction Manual.
Table 1. Rated Input Fuse Input Voltage Output Power 24V 12V 5V 72V 0.8A 72V 0.8A 72V 1.2A 1.5W 72V 0.8A 72V 1.2A 72V 2.0A 3 W 72V 1.2A 72V 2.0A 72V 4.0A 6 W 125V 6.3A 125V 3.5A 125V 2.0A 10 W 72V 2.0A 125V 8.0A 125V 5.0A 15 W 125V 10.0A 125V 6.3A 125V 3.15A 25 W
48V 72V 0.8A 72V 0.8A 72V 0.8A 125V 1.0A 72V 2.0A 125V 2.0A
ZU/ZT
420
Free Datasheet http://www.datasheet4u.com/
Instruction Manual
ZU1R5 • ZU3 • ZU6 • ZU10 1 ZT1R5 • ZT3 1 2 2 2.1 Input voltage . . . . . . . . . . . . . . . . . . . . . . . . 422 2.1 Input voltage . . . . . . . . . . . . . . . . . . . . . . . . 433 2.2 Overcurrent protection . . . . . . . . . . . . . . . 422 2.2 Overcurrent protection . . . . . . . . . ..