BP3125

BP 3125 125 Watt Photovoltaic Module High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells. Performance Rated power (Pmax) Power tolerance Nominal voltage Limited Warranty1 125W ± 5% 12V 25 years Configuration S BP 3125S U BP 3125U Clear universal frame with LoPro J-Box and polarized Multicontact (MC) connectors Clear universal frame and standard J-Box Electrical Characteristics2 Maximum power (Pmax)3 Voltage at Pmax (Vmp) Current at Pmax (Imp) Warranted minimum Pmax Short-circuit current (Isc) Open-circuit voltage (Voc) Temperature coefficient of Isc Temperature coefficient of Voc Temperature coefficient of power NOCT (Air 20°C; Sun 0.8kW/m2 ; wind 1m/s) Maximum series fuse rating Maximum system voltage BP 3125 125W 17.6V 7.1A 118.75W 7.54A 22.1V (0.065±0.015)%/ °C -(80±10)mV/°C -(0.5±0.05)%/ °C 47±2°C 15A (S); 20A (U) 600 V (US NEC rating) 1000V (IEC 61215 rating) Mechanical Characteristics Dimensions Weight Solar Cells Output Cables Junction Box S,U S,U S,U S U Length: 1510mm (59.4”) Width: 674mm (26.5”) 12.0 kg (26.5 pounds) 36 cells (157mm x 157mm) in a 4x9 matrix connected in series RHW AWG# 12 (4mm2) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths - 900mm (-) and 800mm (+) U-Version junction box with 6-terminal connection block; IP 54, accepts PG 13.5, M20, ½ inch conduit, or cable fittings accepting 6-12mm diameter cable. Terminals accept 2.5 to 10mm2 (8 to 14 AWG) wire. IntegraBus™ tech...