HIN236A

HIN202A thru HIN241A TM Data Sheet May 2000 File Number 4316.4 High Speed +5V Powered RS-232 Transmitters/Receivers The HIN202A-HIN241A family of high-speed RS-232 transmitters/receivers interface circuits meet all ElA highspeed RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The HIN205A and HIN235A require no external capacitors and are ideally suited for applications where circuit board space is critical. The family of devices offers a wide variety of high-speed RS232 transmitter/receiver combinations to accommodate various applications (see Selection Table). The HIN205A, HIN206A, HIN211A, HIN213A, HIN235A, HIN236A, and HIN241A feature a low power shutdown mode to conserve energy in battery powered applications. In addition, the HIN213A provides two active receivers in shutdown mode allowing for easy “wakeup” capability. The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V input, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection. Features Meets All RS-232E and V.28 Specifications Requires Only 0.1µF or Greater External Capacitors (HIN205A, HIN235A and Require No External Capacitors) High Data Ra...