F930J475MAA

www.DataSheet4U.com SOLID TANTALUM ELECTROLYTIC CAPACITORS F93 Resin-molded Chip, Standard Series Specifications Item Category Temperature Range Capacitance Tolerance Dissipation Factor E.S.R. Performance Characteristics --55 ~ +125˚C (Rated temperature : 85˚C) ± 20%, ± 10% (at 120Hz) Refer to P.217 Refer to P.217 After 1 minute's application of rated voltage, leakage current at 20˚C is not more than 0.01CV or 0.5µA, whichever is greater. After 1 minute's application of rated voltage, leakage current at 85˚C is not more than 0.1CV or 5µA, whichever is greater. After 1 minute's application of derated voltage, leakage current at 125˚C is not more than 0.125CV or 6.3µA, whichever is greater. +15% Max. (at +125˚C) +10% Max. (at +85˚C) --10% Max. (at --55˚C) At 40˚C 90 ~ 95% R.H. 500 hours Capacitance Change Within ±10% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less --55˚C / +125˚C 30 minutes each 5 cycles Capacitance Change Within ±5% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less Test condition: 5 seconds immersion at 260˚C,10 seconds reflow at 260˚C Capacitance Change Within ±5% of initial value Dissipation Factor......Initial specified value or less Leakage Current........Initial specified value or less After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, seconds OFF...