SST58SM016

ATA-Disk Module SST58SM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 SST58LM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 SST58SM/LMxxxATA-Disk Module 8MB / 16MB / 24MB / 32MB / 48MB / 64MB / 96MB / 128MB / 192MB Advance Information FEATURES: ATA/IDE standard interface – 512 Bytes per sector – ATA command set compatible – Selectable Master/Slave Operation – Support Data Transfer Speed up to PIO Mode-4 8, 16, 24, 32, 48, 64, 96, 128, and 192 MByte capacities Standard Female IDE Connector – 40-pin and 44-pin Single Voltage Read and Write Operation – 5.0V-only for SST58SMxxx – 3.3V-only for SST58LMxxx Supports 5.0-Volt or 3.3-Volt Read and Write – 4.5-5.5V or 3.135-3.465V for Commercial Low Power Consumption – Active mode: 35 mA/55 mA (3.3V/5.0V) (typical) – Sleep mode: 100 µA/150 µA (3.3V/5.0V) (typical) Sustained Write Performance – Up to 1.4 MB/sec (host to flash) Extended Data Protection and Security – WP# pin for Data Protection – Factory-Programmed, 20-Byte Unique ID number Controller Overhead Command to DRQ – Less than 0.5 ms Zero Power Data Retention – Batteries not required for data storage Start Up Time – Sleep to read: 200 ns (typical) – Sleep to write: 200 ns (typical) – Power-on to Ready:200 ms (typical) Support for Commercial Temperature Range – 0°C to +70°C for Operating Commercial – -50°C to +100°C for non-Operating (storage) Extremely Rugged and Reliable – Built-in ECC support corrects 3 Bytes of error per 512 Byte sector ...