DatasheetsPDF.com

EMI4182 Dataheets PDF



Part Number EMI4182
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description Common Mode Filter
Datasheet EMI4182 DatasheetEMI4182 Datasheet (PDF)

EMI4182 Common Mode Filter with ESD Protection Functional Description The EMI4182 is an integrated common mode filter providing both ESD protection and EMI filtering for high speed digital serial interfaces such as HDMI or MIPI D-PHY. The EMI4182 provides protection for two differential data line pairs in a small RoHS-compliant WDFN10 package. Features http://onsemi.com MARKING DIAGRAMS 42MG G • Highly Integrated Common Mode Filter (CMF) with ESD Protection • • • • • • provides protection an.

  EMI4182   EMI4182



Document
EMI4182 Common Mode Filter with ESD Protection Functional Description The EMI4182 is an integrated common mode filter providing both ESD protection and EMI filtering for high speed digital serial interfaces such as HDMI or MIPI D-PHY. The EMI4182 provides protection for two differential data line pairs in a small RoHS-compliant WDFN10 package. Features http://onsemi.com MARKING DIAGRAMS 42MG G • Highly Integrated Common Mode Filter (CMF) with ESD Protection • • • • • • provides protection and EMI reduction for systems using High Speed Serial Data Lines with cost and space savings over discrete solutions Large Differential Mode Bandwidth with Cutoff Frequency > 2 GHz High Common Mode Stop Band Attenuation: >25 dB at 700 MHz, >30 dB at 800 MHz Provides ESD Protection to IEC61000-4-2 Level 4, ±15 kV Contact Discharge Low Channel Input Capacitance Provides Superior Impedance Matching Performance Low Profile Package with Small Footprint in WDFN10 2 x 2.5 mm Pb−Free Package These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant WDFN10 CASE 511BM 42 M G = Specific Device Code = Date Code = Pb−Free Package (Note: Microdot may be in either location) PIN CONNECTIONS In_1+ In_1− GND In_2+ In_2− 1 2 3 4 5 10 9 8 7 6 Out_1+ Out_1− GND Out_2+ Out_2− Applications • HDMI/DVI Display in Mobile Phones • MIPI D-PHY (CSI-2, DSI, etc) in Mobile Phones and Digital Still Cameras 1 2 External (Connector) 4 5 10 9 7 6 Internal (ASIC) ORDERING INFORMATION Device EMI4182MTTAG Package WDFN10 (Pb−Free) Shipping† 3000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 3, 8 Figure 1. EMI4182 Electrical Schematic © Semiconductor Components Industries, LLC, 2011 May, 2011 − Rev. 0 1 Publication Order Number: EMI4182/D Free Datasheet http://www.datasheet4u.com/ EMI4182 PIN FUNCTION DESCRIPTION Pin Name In_1+ In_1− Out_1+ Out_1− In_2+ In_2− Out_2+ Out_2− VN Pin No. 1 2 10 9 4 5 7 6 3, 8 Type I/O I/O I/O I/O I/O I/O I/O I/O GND CMF Channel 1+ to Connector CMF Channel 1− to Connector CMF Channel 1+ to ASIC CMF Channel 1− to ASIC CMF Channel 2+ to Connector CMF Channel 2− to Connector CMF Channel 2+ to ASIC CMF Channel 2− to ASIC Ground Description ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Parameter Operating Temperature Range Storage Temperature Range ESD Discharge IEC61000−4−2 Contact Discharge Maximum Lead Temperature for Soldering Purposes (1/8” from Case for 10 seconds) DC Current per Line Symbol TOP TSTG VPP TL ILINE Value −40 to +85 −65 to +150 ±15 260 100 Unit °C °C kV °C mA Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol ILEAK VF CIN RCH f3dB Fatten VESD Parameter Channel Leakage Current Channel Negative Voltage Channel Input Capacitance to Ground (Pins 1, 2, 4, 5 to Pins 3, 8) Channel Resistance (Pins 1−10, 2−9, 4−7 and 5−6) Differential Mode Cut−off Frequency Common Mode Stop Band Attenuation ESD Protection − Peak Discharge Voltage at any channel input, in system: Contact discharge per IEC61000−4−2 standard TLP Clamping Voltage (See Figure 12) 50 W Source and Load Termination @ 800 MHz TA = 25°C (Notes 1 and 2) Pins 1, 2, 4, 5 Forward IPP = 8 A Forward IPP = 16 A Forward IPP = −8 A Forward IPP = −16 A TA = 25°C, IPP = 1 A, tP = 8/20 ms Any I/O pin to Ground; Notes 1 and 3 (Note 3) IT = 1 mA; (Note 4) 5.6 ±15 Test Conditions TA = 25°C, VIN = 5 V, GND = 0 V TA = 25°C, IF = 10 mA TA = 25°C, At 1 MHz, GND = 0 V, VIN = 1.65 V 0.1 0.8 8.0 2.0 30 Min Typ Max 1.0 1.5 1.3 Unit mA V pF W GHz dB kV VCL 12 18 −6 −12 1.36 0.6 5.0 9.0 V V V V RDYN Dynamic Resistance Positive Transients Negative Transients Reverse Working Voltage Breakdown Voltage VRWM VBR V V 1. Standard IEC61000−4−2 with CDischarge = 150 pF, RDischarge = 330, GND grounded. 2. These measurements performed with no external capacitor. 3. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. 4. VBR is measured at pulse test current IT. http://onsemi.com 2 Free Datasheet http://www.datasheet4u.com/ EMI4182 TYPICAL CHARACTERISTICS 0 −1 −2 −3 dB (SCC21) −4 −5 −6 −7 −8 −9 1E5 1E6 1E7 1E8 1E9 6E9 Frequency, Hz dB (SCC21) 0 −5 −10 −15 −20 −25 −30 −35 −40 1E5 1E6 1E7 1E8 Frequency, Hz 1E9 6E9 Figure 2. Differential Mode Attenuation vs. Frequency (Zdiff = 100 W) 0 −5 −10 dB(SDD22) dB(SDD11) −15 −20 −25 −30 −35 −40 1E5 1E6 1E7 1E8 Frequency, Hz 1E9 6E9 Figure 3. Common Mode Attenuation vs. Frequency (Zcomm = 50 W) Figure 4. Differential Return Loss vs. Frequency (Zdiff=10.


EMI4172 EMI4182 EMI4183


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)