ESD7016

ESD7016, SZESD7016 Low Capacitance ESD Protection USB3.0 The ESD7016 transient voltage suppressor is specifically designed to protect USB3.0 interfaces by integrating two Superspeed pairs, D+, D−, and Vbus lines into a single protection product. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed differential lines. Features http://onsemi.com MARKING DIAGRAM UDFN8 CASE 517CB 1 6M MG G Low Capacitance (0.15 pF Typical, I/O to GND) Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4) Low ESD Clamping Voltage SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable This is a Pb−Free Device 6M = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) PIN CONFIGURATION AND SCHEMATIC I/O 1 I/O 2 N/C Vbus or Ground I/O 3 Typical Applications USB 3.0 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature − Maximum (10 Seconds) IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD) Symbol TJ Tstg TL ESD ESD Value − 55 to +125 − 55 to +150 260 ±15 ±15 Unit °C °C °C kV kV N/C I/O 4 I/O 5 I/O 6 Stresses exceeding...