Quad SPDT Switches
Data Sheet
FEATURES
Latch-up proof Human body model (HBM) ESD rating: 8 kV Low on resistance (13.5 Ω) ±9 V to ±22 V dual...
Description
Data Sheet
FEATURES
Latch-up proof Human body model (HBM) ESD rating: 8 kV Low on resistance (13.5 Ω) ±9 V to ±22 V dual-supply operation 9 V to 40 V single-supply operation 48 V supply maximum ratings Fully specified at ±15 V, ±20 V, +12 V, and +36 V VSS to VDD analog signal range
APPLICATIONS
Relay replacement Automatic test equipment Data acquisition Instrumentation Avionics Audio and video switching Communication systems
GENERAL DESCRIPTION
The ADG5433 and ADG5434 are monolithic industrial CMOS analog switches comprising three independently selectable single-pole, double-throw (SPDT) switches and four independently selectable SPDT switches, respectively. All channels exhibit break-before-make switching action that prevents momentary shorting when switching channels. An EN input on the ADG5433 (LFCSP and TSSOP packages) is used to enable or disable the device. When disabled, all channels are switched off. The ultralow on resistance and on-resistance flatness of these switches make them ideal solutions for data acquisition and gain switching applications, where low distortion is critical.
High Voltage Latch-Up Proof, Triple/Quad SPDT Switches ADG5433/ADG5434
FUNCTIONAL BLOCK DIAGRAMS
ADG5433
S1A D1
S1B S3B D3
S2B S3A D2
S2A
LOGIC
09207-001
IN1 IN2 IN3 EN
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 1. ADG5433 TSSOP and LFCSP_WQ
ADG5434
S1A
S4A
D1 D4
S1B
S4B
S2B
S3B
D2 D3
S2A
S3A
LOGIC
09207-002
IN1 IN2 IN3 IN4
SWITCHES SHOWN FOR A LOGIC 1 INPUT.
Figure 2. AD...
Similar Datasheet