DatasheetsPDF.com

RLR32C1R00FMR6423 Dataheets PDF



Part Number RLR32C1R00FMR6423
Manufacturers Vishay
Logo Vishay
Description Metal Film Resistors
Datasheet RLR32C1R00FMR6423 DatasheetRLR32C1R00FMR6423 Datasheet (PDF)

ERL (Military RLR) www.vishay.com Vishay Dale Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR • Meets requirements of MIL-PRF-39017 • Failure rate: Verified failure rate (contact factory for current level) • Epoxy coated construction provides superior moisture protection • Traceability of materials and processing • Monthly lot acceptance testing • Very low noise (- 40 dB) • Extensive stocking program at distributors and factory in ± 1 % and ± 2 % toler.

  RLR32C1R00FMR6423   RLR32C1R00FMR6423


Document
ERL (Military RLR) www.vishay.com Vishay Dale Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR • Meets requirements of MIL-PRF-39017 • Failure rate: Verified failure rate (contact factory for current level) • Epoxy coated construction provides superior moisture protection • Traceability of materials and processing • Monthly lot acceptance testing • Very low noise (- 40 dB) • Extensive stocking program at distributors and factory in ± 1 % and ± 2 % tolerances • Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements FEATURES STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL ERL05, ERL05..19 (3) ERL07, ERL07..23 (3) MIL-PRF-39017 STYLE RLR05 RLR07 MIL SPEC. SHEET 05 01 POWER RATING 70 °C W 0.125 0.25 RESISTANCE RANGE (1)  4.7 to 301K 302K to 1M 1 to 9.76 10 to 3.01M 3.02M to 10M TOLERANCE ±% 1, 2 1, 2 TEMPERATURE COEFFICIENT ± ppm/°C 100 100 MAXIMUM WORKING VOLTAGE (4) V 200 250 LIFE FAILURE RATE (2) M, P, R, S M, P, R M M, P, R, S M, P, R ERL20, RLR20 02 0.50 4.3 to 3.01M 1, 2 100 350 M, P, R ERL20..11 (3) ERL32, RLR32 03 1.0 1 to 2.7M 1, 2 100 500 M, P, R ERL32..1 (3) Notes (1) Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows: MAXIMUM DSCC POWER RATING RESISTANCE TEMPERATURE VISHAY DALE TOLERANCE WORKING DRAWING P70 °C RANGE COEFFICIENT MODEL ±% VOLTAGE NUMBER W  ± ppm/°C V (4) 98020 ERL05..36, ERL05..37 (3) 0.125 1.1M to 22M 2, 5, 10 350 200 0.25 11M to 22M 2, 5, 10 350 250 99011 ERL07..100, ERL07..101 (3) 0.50 3.3M to 22M 2, 5, 10 350 350 98021 ERL20..36, ERL20..37 (3) 1.0 3M to 22M 2, 5, 10 350 350 98022 ERL32..36, ERL32..37 (3) 10 to 2.7M 100 2.0 1, 2, 5, 10 500 97004 ERL62..1, ERL62..2 (3) 350 3M to 22M • Low inductance: DSCC has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 MHz to 30 MHz. Vishay Dale is listed as a resource on these drawings as follows: DSCC DRAWING NUMBER 96002 VISHAY DALE MODEL ERL07..62 POWER RATING P70 °C W 0.25 RESISTANCE RANGE  MAXIMUM INDUCTANCE nH TOLERANCE ±% TEMPERATURE COEFFICIENT ± ppm/°C MAXIMUM WORKING VOLTAGE V (4) (2) (3) (4) 1 to 10 10 1, 2 100 250 11 to 49.9 8 These drawings can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg Consult factory for current QPL failure rates Hot solder dipped leads Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient, max. Dielectric Strength Insulations Resistance Operating Temperature Range Terminal Strength Solderability Weight Revision: 19-Nov-12 UNIT ppm/V VAC  °C lb g CONDITION 5/V when measured between 10 % and full rated voltage RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000  109 min. dry;  1011 min. after moisture test - 65 to + 150 2 lb pull test on RLR05; 5 lb pull test on all other sizes Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208 RLR05 = 0.11; RLR07 = 0.35; RLR20 = 0.75; RLR32 = 1.50 Document Number: 31023 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Free Datasheet http://www.datasheet4u.com/ ERL (Military RLR) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RLR07C3001FRR36 (preferred part numbering format) R MIL STYLE RLR05 RLR07 RLR20 RLR32 L R 0 7 C 3 0 0 1 F R R 3 6 PACKAGING SPECIAL Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable 1 = Hot solder dip (32’s) 11 = Hot solder dip (20’s) 19 = Hot solder dip (05’s) 23 = Hot solder dip (07’s) LEAD MATERIAL C = Solderable/ weldable RESISTANCE TOLERANCE VALUE CODE F=±1% 3 digit significant G=±2% figure, followed by a multiplier Use “R” for values < 100 Ω 1R00 = 1.0 3302 = 33 kΩ 1005 = 10 MΩ FAILURE RATE M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full, except 32’s) R64 = Tin/lead, T/R (full; 32’s only) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code Historical Part Number example: RLR07C3001FR (will continue to be accepted) RLR07 MIL STYLE C LEAD MATERIAL 3001 RESISTANCE VALUE F TOLERANCE CODE R FAILURE RATE R36 PACKAGING Note • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) A E (1) C (Max.) D B Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, .


RLR32C1R00FMR641 RLR32C1R00FMR6423 RLR32C1R00FMRE61


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)