MAX9977

19-0383; Rev 0; 7/05 Quad, Low-Power, 1200Mbps ATE Driver General Description The MAX9977 quad, low-power, high-speed, pin-electronics driver includes, for each channel, a three-level pin driver. The driver features a wide voltage range and high-speed operation, includes high-impedance and active-termination (3rd-level drive) modes, and is highly linear even at low voltage swings. The MAX9977 provides high-speed, differential control inputs with internal 50Ω (100Ω LVDS) termination resistors that allow compatibility with 1.8V and 3.5V terminated 0.4VP-P CML, reducing the discrete component count required on the circuit board. The MAX9977AD has no internal termination. A 3-wire, low-voltage, CMOS-compatible serial interface programs the low-leakage and tri-state/terminate operational configurations of the MAX9977. The MAX9977’s operating range is -1.5V to +6.5V (consult factory for other operating ranges), and features a maximum power dissipation of only 0.8W per channel. The device is available in a 100-pin, 14mm x 14mm x 0.1mm body, and 0.5mm pitch TQFP. An exposed 8mm x 8mm die pad on the top of the package facilitates efficient heat removal. The device is specified to operate with an internal die temperature of +60°C to +100°C, and features a die temperature monitor output. Features o Low Power Dissipation: 0.8W/Channel o High Speed: 1200Mbps at 3VP-P and 1800Mbps at 1VP-P o Low Timing Dispersion o Wide -1.5V to +6.5V Operating Range o Interfaces Easily with Most Logic F...