DatasheetsPDF.com

XQDAWT-00-0000-00000BEE4 Dataheets PDF



Part Number XQDAWT-00-0000-00000BEE4
Manufacturers CREE
Logo CREE
Description LEDs
Datasheet XQDAWT-00-0000-00000BEE4 DatasheetXQDAWT-00-0000-00000BEE4 Datasheet (PDF)

CLD-AP130 rev 2B binning & Labeling Cree XLamp XQ Family LEDs ® ® Table of Contents Introduction... 1 Bin and Order-Code Format. 2 Performance Groups – Luminous Flux... 3 Performance Groups – Forward Voltage 3 Performance Groups – Chromaticity 4 Performance Groups – Dominant Wavelength.. 6 Cree’s Standard White Chromaticity Region.

  XQDAWT-00-0000-00000BEE4   XQDAWT-00-0000-00000BEE4


Document
CLD-AP130 rev 2B binning & Labeling Cree XLamp XQ Family LEDs ® ® Table of Contents Introduction.......................................................... 1 Bin and Order-Code Format.................................... 2 Performance Groups – Luminous Flux....................... 3 Performance Groups – Forward Voltage.................... 3 Performance Groups – Chromaticity......................... 4 Performance Groups – Dominant Wavelength............ 6 Cree’s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve........................................... 7 Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions................................ 8 Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................... 9 Cree’s Standard Chromaticity Kits...........................10 Standard Order Codes and Bins XQ-B ANSI Cool White......................................11 XQ-B Neutral White..........................................11 XQ-B Warm White............................................12 XQ-D ANSI Cool White......................................13 XQ-D Neutral White..........................................14 www.cree.com/XLamp XQ-D Warm White............................................15 XQ-E ANSI Cool White.......................................16 XQ-E Neutral White..........................................17 XQ-E Warm White............................................18 XQ-E Color......................................................19 Introduction This document describes the product nomenclature required to select and order Cree’s XLamp XQ Family LEDs. XLamp XQ Family LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). Color XLamp LEDs are sorted by dominant wavelength (color) and luminous or radiant flux (brightness). LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for XLamp XQ Family LEDs, as well as a list of standard order codes, is provided in this document. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Free Datasheet http://www.datasheet4u.com/ xlamp xQ led binning & labeling Bin and Order-Code Format Bin codes and order codes for XQ LEDs are configured in the following manner: Order Code Series XQB = XQ-B XQD = XQ-D XQE = XQ-E Configuration B: Internal code D: Reel size Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum Chromaticity kit SSSCCC-BD-HHHH-NNNNVRFGG Flux Vf bin 0: Default Internal code Color AWT = White BLU = Blue GRN = Green RED = Red Bin Code Series XQB = XQ-B XQD = XQ-D XQE = XQ-E Internal code Luminous flux group Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum SSSCCC-B-WWW-FFF-VR-AAAA Internal code Vf bin 0: Default Chromaticity bin Color AWT = White BLU = Blue GRN = Green RED = Red Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. 2 Free Datasheet http://www.datasheet4u.com/ xlamp xQ led binning & labeling Performance Groups – Luminous Flux XLamp XQ Family White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These group codes, with a 0 appended, are used in the Bin Code “Luminous flux group.” Group Code H0 J2 J3 K2 K3 M2 M3 N2 N3 N4 P2 P3 P4 Q2 Q3 Q4 Q5 R2 R3 R4 R5 S2 Min. Luminous Flux (lm) 18.1 23.5 26.5 30.6 35.2 39.8 45.7 51.7 56.8 62 67.2 73.9 80.6 87.4 93.9 100 107 114 122 130 139 148 Max. Luminous Flux (lm) 23.5 26.5 30.6 35.2 39.8 45.7 51.7 56.8 62 67.2 73.9 80.6 87.4 93.9 100 107 114 122 130 139 148 156 Performance Groups – Forward Voltage Red XLamp LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward .


XQDAWT-00-0000-00000BFE4 XQDAWT-00-0000-00000BEE4 XQDAWT-00-0000-00000BFF5


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)