CYUSB3035

CYUSB3035 EZ-USB® FX3S SuperSpeed USB Controller Features ■ ■ Universal serial bus (USB) integration ❐ USB 3.0 and USB 2.0 peripherals compliant with USB 3.0 specification 1.0 ❐ 5-Gbps USB 3.0 PHY compliant with PIPE 3.0 ❐ High-speed On-The-Go (HS-OTG) host and peripheral compliant with OTG Supplement Version 2.0 ❐ Thirty-two physical endpoints ❐ Support for battery charging Spec 1.1 and accessory charger adaptor (ACA) detection General Programmable Interface (GPIF™ II) ❐ Programmable 100-MHz GPIF II enables connectivity to a wide range of external devices ❐ 8- and 16-bit data bus ❐ As many as 16 configurable control signals Mass storage support ❐ SD 3.0 (SDXC) UHS-1 ❐ eMMC 4.41 ❐ Two ports that can support memory card sizes up to 2TB System I/O expansion with two secure digital I/O (SDIO) ports Native USB-attached storage (UAS), mass-storage class (MSC), human interface device (HID), full, and Turbo-MTP™ support Fully accessible 32-bit CPU ❐ ARM926EJ core with 200-MHz operation ❐ 512-KB or 256-KB embedded SRAM Additional connectivity to the following peripherals 2 ❐ I C master controller at 1 MHz ❐ I2S master (transmitter only) at sampling frequencies of 32 kHz, 44.1 kHz, and 48 kHz ❐ UART support of up to 4 Mbps ❐ SPI master at 33 MHz Selectable clock input frequencies ❐ 19.2, 26, 38.4, and 52 MHz ❐ 19.2-MHz crystal input support Ultra low-power in core power-down mode ❐ Less than 60 µA with VBATT on ❐ 20 µA with VBATT off Independent power domains for core and I/O ❐ C...