L5953
Multiple switching voltage regulator
Features
■ ■ ■ ■
PWM: adjustable 2.5/10V - 1A switching voltage regulator Ex...
L5953
Multiple switching voltage
regulator
Features
■ ■ ■ ■
PWM: adjustable 2.5/10V - 1A switching voltage
regulator External POWER MOS ability for output current enhancement Synchronization function REG1- Linear low drop 3.3/5V - 250mA STBY voltage
regulator (low current consumption) with RESET REG2- Linear voltage
regulator 1.5V to 3.3V externally adjustable - 300mA maximum current HSD1 : 500mA High side driver HSD2 : 200mA High side driver SPI Interface SPI Diagnostics HSD1, HSD2 Double switching frequency SPI selectable Double inpuT LVW
PowerSO36
■
■ ■ ■ ■ ■ ■
Protections
■ ■ ■ ■
Over voltage protection Internal current limiting Thermal shutdown ESD
SPI functions
■
Description
The L5953 is the integration of one switching
regulator, two linear voltage
regulators, two low voltage warnings and two high side drivers. It has a stand-by operation mode (low current consumption) where only the stand-by voltage
regulator plus the low voltage warnings are active. The other
regulators and high side drivers are controlled by the SPI interface.
Input controls – Turn-on/off PWM – Turn-on/off REG2 – Turn-on/off HSD1 – Turn-on/off HSD2 – Switching frequency selection f1- f2 Output functions: – HSD1 & HSD2 short to gnd, open load and short to battery (Test mode) – Thermal warning Device summary
Part number L5953
■
Table 1.
Package PowerSO36
Packing Tray
September 2007
Rev 2
1/31
www.st.com 1
Free Datasheet http://www.datasheet4u.com/
Contents
L5953
Contents
1 2 Block ...