MS27039F

INCH-POUND MS27039F 15 NOVEMBER 1995 SUPERSEDING MS27039E 24 JANUARY 1995 MILITARY SPECIFICATION SHEET SCREW, MACHINE - PAN HEAD, STRUCTURAL, CROSS RECESSED This Specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Index of Specifications and Standards (DODISS) specified in the solicitation: MIL-S-7839 ± ∅ ∅ ° Figure 1. Dimensions and configurations. AMSC N/A 1 of 6 FSC 5305 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Free Datasheet http://www.datasheet4u.com/ MS27039F NOTES: 1. 2. 3. 4. 5. All dimensions are in inches. Screws shall be free from burrs and sharp edges. Dimensions are to be met after plating. Shank diameter may be .001 oversize for a maximum distance of .031 adjacent to the head. In the event a conflict between the text of this document and the references cited herein, the text of this document will take precedence. 6. Unless otherwise specified, issues of referenced documents are those in effect at the time of solicitation. 7. Caution should be taken during plating process. The contractor shall be responsible for the safe reutilization and disposal of all materials generated by this process in accordance with ASTM A380, section 8.2 and 8.7. 8. Items manufactured to Rev. C and Rev. D ...