ADP5061

Data Sheet Tiny, I2C Programmable, Linear Battery Charger with Power Path and USB Mode Compatibility ADP5061 FEATURES 2.6 mm × 2 mm WLCSP package Fully programmable via I2C Flexible digital control inputs Up to 2.1 A current from an ac charger in LDO mode Operating input voltage from 4.0 V to 6.7 V Tolerant input voltage from −0.5 V to +20 V (USB VBUS) Fully compatible with USB 3.0 and USB Battery Charging Specification 1.2 Built-in current sensing and limiting As low as 30 mΩ battery isolation FET between battery and charger output Thermal regulation prevents over heating Compliant with JEITA 1 and JEITA 2 Li-Ion battery charging temperature specifications SYS_EN flag permits the system to be disabled until battery is at minimum required level for guaranteed system start-up APPLICATIONS Digital still cameras Digital video cameras Single cell Li-Ion portable equipment PDAs, audio, and GPS devices Portable medical devices Mobile phones GENERAL DESCRIPTION The ADP5061 charger is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port. The ADP5061 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V. The 20 V voltage tolerance alleviates the concerns about the USB bus spiking during disconnect or connect scenarios. The ADP5061 features an internal FET between the linear charger output and the battery. This permits battery isol...