ISL6252

® ISL6252, ISL6252A Data Sheet August 25, 2010 FN6498.3 Highly Integrated Battery Charger Controller for Notebook Computers The ISL6252, ISL6252A is a highly integrated battery charger controller for Li-ion/Li-ion polymer batteries. High Efficiency is achieved by a synchronous buck topology. The low side MOSFET emulates a diode at light loads to improve the light load efficiency and prevent system bus boosting. The constant output voltage can be selected for 2, 3 and 4 series Li-ion cells with 0.5% accuracy over-temperature. It can also be programmed between 4.2V + 5%/cell and 4.2V - 5%/cell to optimize battery capacity. When supplying the load and battery charger simultaneously, the input current limit for the AC adapter is programmable to within 3% accuracy to avoid overloading the AC adapter, and to allow the system to make efficient use of available adapter power for charging. It also has a wide range of programmable charging current. The ISL6252, ISL6252A provides outputs that are used to monitor the current drawn from the AC adapter, and monitor for the presence of an AC adapter. The ISL6252, ISL6252A automatically transitions from regulating current mode to regulating voltage mode. Features ±0.5% Charge Voltage Accuracy (-10°C to +100°C) ±3% Accurate Input Current Limit ±3% Accurate Battery Charge Current Limit ±25% Accurate Battery Trickle Charge Current Limit Programmable Charge Current Limit, Adapter Current Limit and Charge Voltage Fixed 300kHz PWM S...