Leaded Oscillator, TCXO, TCVCXO Metal Package, Full Size DIP
I121/I122/I321/I322 Series
Product Features:
Available in Both Clipped Sinewave and HCMOS Output Levels Compatible with Leadfree Processing
Applications:
Base Station IP WiMax / Wlan General Purpose
11.7 18.3
Frequency I121/I321 I122/I322 Output Level Clipped Sinewave HCMOS Output Load Clipped Sinewave HCMOS Duty Cycle (HCMOS) Rise / Fall Time (HCMOS) Frequency Stability Frequency Tolerance @ 25° C Aging Supply Voltage Current
9.600 Mhz to 40 Mhz 1.000 Mhz to 40 Mhz
1.0
1.0 V p-p Min. ‘0’=0.1 VCC Max., ‘1’=0.9Vcc Min.
20K Ohms / 10 pF 15pF 50% ±10% 10 nS Max. See Frequency Stability Table Included in Stability Tolerance ± 1 ppm / Year Max. See Supply Voltage Table , tolerance ± 5% 3.0 mA Max. (Clipped Sinewave) 20.0 mA Max. (HCMOS)
http://www.DataSheet4U.net/
4.0 Min.
5.8 Max. 0.50 0.45 4.0 2.5
15.00
7.60
Voltage Control (I321/ I322)
1.65 VDC ± 1.5 VDC, ± 5.0 ppm Min. for Vcc = 3.3 VDC 2.5 VDC ± 2.0 VDC, ± 5.0 ppm Min. for Vcc = 5.0 VDC Positive See Operating Temperature Table -40° C to +85° C
Slope Operating Storage
Pin 1 7 8 14
Connection Vcontrol / N.C. GND Output Vcc
Dimension Units: mm
Package
I121 (Clipped Sinewave TCXO) I122 (HCMOS TCXO) I321 (Clipped Sinewave TCVCXO) I322 (HCMOS TCVCXO)
Part Number Guide Operating Temperature
7 = 0° C to +50° C 1 = 0° C to +70° C 3 = -20° C to +70° C 2 = -40° C to +85° C
Sample Part Number: I121-1Q3-20.000 Mhz FrequencyStability vs Temperature Supply Voltage
**O = ±1.5 ppm **P = ±2.0 ppm Q = ±2.5 ppm R = ±3.0 ppm J = ±5.0 ppm 3 = 3.3 V 5 = 5.0 V
Frequency
- 20.000 MHz
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. ** Not available for all temperature ranges.
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail:
[email protected] • www.ilsiamerica.com
1/10_A Specifications subject to change without notice
Page 1
datasheet pdf - http://www.DataSheet4U.net/
Leaded Oscillator, TCXO, TCVCXO Metal Package, Full Size DIP Pb Free Solder Reflow Profile:
I121/I122/I321/I322 Series
Typical Application:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = 2a Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal).
Environmental Specifications
Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215
http://www.DataSheet4U.net/
Marking
Line 1: ILSI and Date Code Line 2: IXXX-XXX (Part Number detail = IXXX-XXX-Freq.) Line 3: Frequency
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail:
[email protected] • www.ilsiamerica.com
1/10_A Specifications subject to change without notice
Page 2
datasheet pdf - http://www.DataSheet4U.net/
.