Ultra Low Power 128K x 8 CMOS SRAM
SD18U128 SD18U128L
Ultra Low Power 128K x 8 CMOS SRAM
Features
• Low-power consumption - Active: 20mA at 70ns - Stand-b...
Description
SD18U128 SD18U128L
Ultra Low Power 128K x 8 CMOS SRAM
Features
Low-power consumption - Active: 20mA at 70ns - Stand-by: 5 µA (CMOS input/output) 1 µA CMOS input/output, L version Single +1.8to 2.2V Power Supply Equal access and cycle time 70/85/100/150 ns access time Easy memory expansion with CE1, CE2 and OE inputs 1.0V data retention mode TTL compatible, Tri-state input/output Automatic power-down when deselected
Functional Description
The SD18U128 is a low power CMOS Static RAM organized as 131,072 words by 8 bits. Easy memory expansion is provided by an active LOW CE1, an active HIGH CE2, an active LOW OE, and Tri-state I/O’s. This device has an automatic power-down mode feature when deselected. Writing to the device is accomplished by taking Chip Enable 1 (CE1) with Write Enable (WE) LOW, and Chip Enable 2 (CE2) HIGH. Reading from the device is performed by taking Chip Enable 1 (CE1) with Output Enable (OE) LOW while Write Enable (WE) and Chip Enable 2 (CE2) is HIGH. The I/O pins are placed in a high-impedance state when the device is deselected: the outputs are disabled during a write cycle. The SD18U128L comes with a 1V data retention feature and Lower Standby Power. The SD18U128 is available in a 32-pin 8 x 20 mm TSOP1 / STSOP / 48-fpBGA packages.
Logic Block Diagram
http://www.DataSheet4U.net/
32-Pin TSOP1 / STSOP (See next page)
A11 A9 A8 A13 WE CE2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
OE A10...
Similar Datasheet