DatasheetsPDF.com

SSA-EB1MLXRP-12ED1Q8 Dataheets PDF



Part Number SSA-EB1MLXRP-12ED1Q8
Manufacturers Banner Engineering
Logo Banner Engineering
Description Emergency Stop Push Buttons
Datasheet SSA-EB1MLXRP-12ED1Q8 DatasheetSSA-EB1MLXRP-12ED1Q8 Datasheet (PDF)

SSA-EB Series Emergency Stop Push Buttons Illuminated Flush Mount Electro-Mechanical Push Buttons Features • Rugged design; easy installation with no assembly or individual wiring required • Push-to-stop, twist-to-release (standard and lockable), or pull-to-release (standard) operation per IEC60947-5-5 • Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1 • Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements • “Safe .

  SSA-EB1MLXRP-12ED1Q8   SSA-EB1MLXRP-12ED1Q8


Document
SSA-EB Series Emergency Stop Push Buttons Illuminated Flush Mount Electro-Mechanical Push Buttons Features • Rugged design; easy installation with no assembly or individual wiring required • Push-to-stop, twist-to-release (standard and lockable), or pull-to-release (standard) operation per IEC60947-5-5 • Latching design complies with ISO 13850; direct (positive) opening operation per IEC 60947-5-1 • Compliant with ANSI B11.19, ANSI NFPA79, and IEC/EN 60204-1 Emergency Stop requirements • “Safe Break Action” ensures NC contacts will open if the contact block is separated from the actuator • 8-pin M12/Euro-style Quick Disconnect • Models with highly visible indication of actuation (armed or depressed/latched button) • "Emergency Stop" legend included Models SSA-EB… series are "mushroom-style" electro-mechanical emergency stop push buttons. When the button is armed, the switch's safety contacts (NC) are closed and its monitoring contacts (NO), if present, are open. When the button is pushed, the switch's safety contacts open and the monitoring contacts close. The contacts remain in this condition until the push button is manually rearmed by twisting clockwise the red push button actuator, or by pulling on the models with the standard actuator. The SSA-EB1P..-..ED1.. series has a flat mounting base for ease of mounting without requiring an additional enclosure. The EZ-LIGHT™ illumination logic allows for easy identification of a pushed/actuated button. An armed button will light a steady yellow or green illumination or OFF (depending on model), a pushed/actuated button is indicated by a red illumination (flashing or solid depending on model). An optional input allows an armed button to illuminate a steady red to indicate a machine stop or emergency stop condition. In a series string of E-Stop buttons, this logic gives the user the choice to either have the armed buttons stay YELLOW (GREEN) or turn steady RED when a STOP condition exists. http://www.DataSheet4U.net/ SSA-EB1M… series padlock-style lockable emergency stop push buttons are intended to prevent unauthorized or accidental resetting of a pushed/latched button. The SSA-EB1M… series are not to be used as an energy isolating device or as the sole means of complying with Lockout/Tagout or with the requirements of the isolation of hazardous energy (see OSHA 29CFR1910.147, ANSI Z244.1, CSA Z460, ISO 14118). The locking feature can be used to provide supervisory/personal control and provide an additional safety measure(s) to reduce the likelihood of inadvertent arming and energization of the emergency stop circuit. Models Model SSA-EB1PLXR-12ED1Q8 SSA-EB1PLYR-12ED1Q8 SSA-EB1PL-12ED1Q8 SSA-EB1PLGR-12ED1Q8 SSA-EB1MLXRP-12ED1Q8 SSA-EB1MLYRP-12ED1Q8 SSA-EB1MLP-12ED1Q8 SSA-EB1MLGRP-12ED1Q8 E-Stop Contact 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) 2NC/1NO (PNP) Pushbutton Standard Standard Standard Standard Lockable Lockable Lockable Lockable EZ-Light™ Illumination Logic and Description RED-Flash/Solid YELLOW/RED-Flash/Solid RED-Solid GREEN/RED-Flash/Solid RED-Flash/Solid YELLOW/RED-Flash/Solid RED-Solid GREEN/RED-Flash/Solid Important... Read this before proceeding! The user is responsible for satisfying all local, state, and national laws, rules, codes, and regulations relating to the use of this product and its application. Banner Engineering Corp. has made every effort to provide complete application, installation, operation, and P/N 165998_web Rev. A 9/10/2012 datasheet pdf - http://www.DataSheet4U.net/ SSA-EB Series Emergency Stop Push Buttons maintenance instructions. Please direct any questions regarding the use or installation of this product to the factory applications department at the telephone numbers or address shown found at http://www.bannerengineering.com. The user is responsible for making sure that all machine operators, maintenance personnel, electricians, and supervisors are thoroughly familiar with and understand all instructions regarding the installation, maintenance, and use of this product, and with the machinery it controls. The user and any personnel involved with the installation and use of this product must be thoroughly familiar with all applicable standards, some of which are listed within the specifications. Banner Engineering Corp. makes no claim regarding a specific recommendation of any organization, the accuracy or effectiveness of any information provided, or the appropriateness of the provided information for a specific application. WARNING: Not a Safeguarding Device An Emergency Stop Device is not considered a safeguarding device because it requires an overt action by an individual to stop machine motion or hazards. (A safeguarding device limits or eliminates an individual's exposure to a hazard without action by the individual or others.) Because an individual must actuate the device for it to function, these devices do not fit the definition of a safeguarding de.


SSA-EB1PLGR-12ED1Q8 SSA-EB1MLXRP-12ED1Q8 SSA-EB1MLYRP-12ED1Q8


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)