NCP338

NCP338 2A Ultra-Small Controlled Load Switch with Auto-discharge Path The NCP338 is very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy. Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used. Output discharge path is also embedded to eliminate residual voltages on the output rail. Proposed in a wide input voltage range from 1.0 V to 3.6 V, in a small 0.8 x 1.2 mm WLCSP6, pitch 0.4 mm. Features 1.0 V − 3.6 V Operating Range 16 mW P MOSFET at 3.6 V DC Current Up to 2 A Output Auto−discharge Active High EN Pin WLCSP6 0.8 x 1.2 mm ESD Ratings: 6 kV HBM, 250 V MM This is a Pb−Free Device Typical Applications Mobile Phones Tablets Digital Cameras GPS Portable Devices www.onsemi.com MARKING DIAGRAM WLCSP6 CASE 567FY AM AYW AM = Specific Device Code A = Assembly Location Y = Year W = Work Week PIN DIAGRAM 12 A OUT IN B OUT IN C GND EN ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. V+ DCDC Converter or LDO LS NCP338 A2 B2 IN OUT IN OUT C2 EN A1 B1 Platform IC’n C1 GND ENx 0 Figure 1. Typical Application Circuit EN © Semiconductor Components Industries, LLC, 2013 August, 2016 − Rev. 3 1 Publication Order Number: NCP338/D NCP338 PIN FUNCTION DESCRIPTION Pin Name Pin Number T...