SS6383(G)
1.5A DDR Termination Regulator
FEATURES
Source and sink current capability of 1.5A Low output voltage offset, ...
SS6383(G)
1.5A DDR Termination
Regulator
FEATURES
Source and sink current capability of 1.5A Low output voltage offset, ±20mV
DESCRIPTION
The SS6383 linear
regulator is designed to provide 1.5A source and sink current while regulating an output voltage to within 25mV. The SS6383 converts voltage supplies ranging from 1.6V to 6V into an output voltage that is set by two external voltage-divider resistors. It provides an excellent voltage source for active termination schemes for high-speed transmission lines such as those seen in highspeed memory buses. The built-in current-limiting in source and sink mode, together with thermal shutdown, provides maximum protection to the SS6383 against fault conditions.
High accuracy output voltage at full-load VOUT adjustable by external resistors Low external component count Current limit protection Thermal protection SO-8 package
APPLICATIONS
Mother Board Graphic Cards DDR Termination Voltage Supply - supports DDR1 (1.25VTT), DDR2 (0.9VTT), and meets JEDEC SSTL-2 and SSTL-3 term. specifications
www.DataSheet.net/
TYPICAL APPLICATION CIRCUIT
VIN=2.5V CIN 470µF + 1 R1 100K 2 3 C1 R2 EN 100pF 100K SSM7002EN VOUT=1.25V + 4 VIN GND VREF VOUT VCNTL VCNTL VCNTL VCNTL 8 VCNTL=3.3V CCNTL 47µF 6 5
+
7
COUT 220µF
SS6383
This device is available with Pb-free lead finish (second-level interconnect) as SS6383GS
10/07/2004 Rev.1.01
www.SiliconStandard.com
1 of 7
Datasheet pdf - http://www.DataSheet4U.co.kr/
SS6383(G)
ORDERING INFORMATION
SS...