LPC1102LVUK

LPC111xLV/LPC11xxLVUK 32-bit ARM Cortex-M0 MCU; up to 32 kB flash, 8 kB SRAM; 8-bit ADC Rev. 2 — 10 October 2012 Product data sheet 1. General description The LPC111xLV/LPC11xxLVUK is an ARM Cortex-M0-based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The LPC111xLV/LPC11xxLVUK operate at CPU frequencies of up to 50 MHz. The peripherals of the LPC111xLV/LPC11xxLVUK include up to 32 kB of flash memory, up to 8 kB of SRAM data memory, a Fast-mode Plus I2C-bus interface, one SSP/SPI interface, one UART, four general-purpose counter/timers, an 8-bit ADC, and up to 27 general-purpose I/O pins. 2. Features and benefits  System:  ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.  ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).  Serial Wire Debug.  System tick timer.  Memory:  Up to 32 kB on-chip flash programming memory with a 256 byte page erase function.  Up to 8 kB SRAM.  In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.  Digital peripherals:  Up to 27 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and a configurable open-drain mode.  GPIO pins can be used as edge and level sensitive interrupt sources.  High-current output driver on one pin.  High-current sink drive...