Document
Bulletin I25201 rev. B 03/03
80RIA SERIES
PHASE CONTROL THYRISTORS Stud Version
Features
Hermetic glass-metal seal International standard case TO-209AC (TO-94)
80A
Typical Applications
DC motor controls Controlled DC power supplies AC controllers
www.DataSheet.net/
Major Ratings and Characteristics
Parameters
IT(AV) @ TC IT(RMS) ITSM @ 50Hz @ 60Hz I 2t @ 50Hz @ 60Hz V DRM /V RRM tq TJ typical
80RIA
80 85 125 1900 1990 18 16 400 to 1200 110 - 40 to 125
Unit
A °C A A A KA2s KA2s V µs °C
case style TO-209AC (TO-94)
www.irf.com
1
Datasheet pdf - http://www.DataSheet4U.co.kr/
80RIA Series
Bulletin I25201 rev. B 03/03
ELECTRICAL SPECIFICATIONS Voltage Ratings
Voltage Type number Code
40 80RIA 80 120
V DRM/V RRM, max. repetitive peak and off-state voltage V
400 800 1200
VRSM , maximum nonrepetitive peak voltage V
500 900 1300
I DRM/I RRM max.
@ TJ = 125°C
mA
15
On-state Conduction
Parameter
I T(AV) Max. average on-state current @ Case temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current
80RIA
80 85 125 1900 1990 1600 1675
Units
A °C A
Conditions
180° conduction, half sine wave
DC @ 75°C case temperature t = 10ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max.
www.DataSheet.net/
A
t = 8.3ms t = 10ms t = 8.3ms t = 10ms
I2t
Maximum I2t for fusing
18 16 12.7 11.7 KA2 s
t = 8.3ms t = 10ms t = 8.3ms
I 2√ t
Maximum I2√t for fusing
180.5 0.99
KA2√s
t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max.
V T(TO)1 Low level value of threshold voltage V T(TO) 2 High level value of threshold voltage r t1 r t2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Typical latching current
V 1.13 (I > π x IT(AV)),TJ = TJ max. (16.7% x π x IT(AV) < I < π x IT(AV)), TJ = TJ max. mΩ 1.84 1.60 200 400 mA T J = 25°C, anode supply 12V resistive load V (I > π x IT(AV)),TJ = TJ max. Ipk= 250A, TJ = 25°C tp = 10ms sine pulse
2.29
2
www.irf.com
Datasheet pdf - http://www.DataSheet4U.co.kr/
80RIA Series
Bulletin I25201 rev. B 03/03
Switching
Parameter
di/dt Max. non-repetitive rate of rise of turned-on current 300 A/µs
80RIA
Units
Conditions
TJ = 125°C, Vd = rated VDRM, ITM = 2xdi/dt snubber Per JEDEC Standard RS-397, 5.2.2.6. 0.2µF, 15Ω, Gate pulse: 20V, 65Ω, tp = 6µs, tr= 0.5µs
td tq
Typical delay time
1 µs
Gate pulse: 10V, 15Ω source, tp = 6µs, tr = 0.1µs, Vd = rated VDRM, ITM = 50Adc, TJ = 25°C. dv/dt = 20V/µs, Gate bias: 0V 25Ω, tp = 500µs ITM = 50A, TJ = TJ max, di/dt = -5A/µs min., VR = 50V,
Typical turn-off time
110
Blocking
Parameter
dv/dt IRRM IDRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current
80RIA
500 15
Units
V/µs mA
Conditions
TJ = 125°C exponential to 67% rated VDRM TJ = 125°C rated V DRM /V RRM applied
www.DataSheet.net/
Triggering
Parameter
PGM Maximum peak gate power
80RIA
12 3 3 20
Units
W A
Conditions
TJ = TJ max, t p ≤ 5ms TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t p ≤ 5ms
PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage IGT Max. DC gate current required to trigger
V 10 270 120 60 mA
TJ = TJ max, tp ≤ 5ms
TJ = - 40°C TJ = 25°C TJ = 125°C TJ = - 40°C V TJ = 25°C TJ = 125°C mA TJ = TJ max Max. gate current/ voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 6V anode-to-cathode applied
VGT
Max. DC gate voltage required to trigger
3.5 2.5 1.5
IGD VGD
DC gate current not to trigger
6
DC gate voltage not to trigger
0.25
V
www.irf.com
3
Datasheet pdf - http://www.DataSheet4U.co.kr/
80RIA Series
Bulletin I25201 rev. B 03/03
Thermal and Mechanical Specification
Parameter
TJ Tstg Max. operating temperature range Max. storage temperature range
80RIA
-40 to 125 -40 to 150 0.30
Units
°C
Conditions
RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink T Mounting torque, ± 10%
DC operation K/W
0.1 15.5 (137) 14 (120) Nm (lbf-in) g
Mounting surface, smooth, flat and greased Non lubricated threads Lubricated threads
wt
Approximate weight Case style
130
TO-209AC(TO-94)
See Outline Table
∆RthJ-C Conduction
(The following table shows the increment of thermal resistence RthJ-C when devices operate at different conduction angles than DC)
Conduction angle
180° 120° 90° 60° 30°
Sinusoidal conduction Rectangular conduction Units
0.042 0.050 0.064 0.095 0.164 0.030 0.052 0.070 0.100
www.DataSheet.net/
Conditions
K/W
T J = T J max.
0.165
Ordering Information Table
Device Code
8
1
0
2
RIA 120
3 4
1 2
-
ITAV x 10A 0 = Eyelet terminals (Gate and.