Fast Switching MOSFETs
SiC714CD10
Vishay Siliconix
Fast Switching MOSFETs With Integrated Driver
PRODUCT SUMMARY
Input Voltage Range Output V...
Description
SiC714CD10
Vishay Siliconix
Fast Switching MOSFETs With Integrated Driver
PRODUCT SUMMARY
Input Voltage Range Output Voltage Range Operating Frequency Continuous Output Current Peak Efficiency Optimized Duty Cycle Ratio 3.3 to 15 V 0.5 to 6 V 100 kHz to 1 MHz Up to 27 A > 94 % at 300 kHz 10 %
FEATURES
Low-side MOSFET control pin for prebias start-up Undervoltage Lockout for safe operation Internal boostrap diode reduces component count Break-Before-Make operation Turn-on/Turn-off Capability Compatible with any single or multi-phase PWM controller Low profile, thermally enhanced PowerPAK® MLF 10 x 10 Package
PowerPAK MLF 10 x 10
1
APPLICATIONS
DC-to-DC Point-of-Load Converters - 3.3 V, 5 V, or 12 V Intermediate BUS - Examples - 12 VIN/0.8 - 2.5 VOUT - 5 VIN/0.8 - 1.5 VOUT Servers and Computers
Bottom View Ordering Information: SiC714CD10-T1 SiC714CD10-T1-E3 (Lead (Pb)-free) *see page 2 for peak temperature
www.DataSheet.net/
Single and Multi-Phase Conversion
DESCRIPTION
The SiC714CD10 is an integrated solution which contains two PWM-optimized MOSFETs (high side and low side MOSFETs) and a driver IC. Integrating the driver allows better optimization of Power MOSFETs. This minimizes the losses and provides better performance at higher frequency. The SiC714CD10 is packed in Vishay Siliconix’s high performance PowerPAK MLF 10 x 10 package. Compact copacking of components helps to reduce stray inductance, and hence increases efficiency.
FUNCTIONAL BLOCK...
Similar Datasheet