BGX7220

BGX7220 Dual receiver down mixer Rev. 1 — 8 August 2012 Product data sheet 1. General description The BGX7220 device combines a pair of high performance, high linearity down-mixers for use in receivers having a common local oscillator, for instance having main and diversity paths. The device covers the frequency range from 700 MHz to 950 MHz. Each mixer provides an input 1 dB compression point (ICP1dB) above 13 dBm, with an input third-order intercept point (IP3i) of 26 dBm. The small-signal Noise Figure (NF) is below 10 dB whereas under large signal blocking conditions the Noise Figure is typically 20 dB. Isolation between mixers is typically 55 dB. 2. Features and benefits            700 MHz to 950 MHz frequency operating range Conversion gain 8 dB in the 900 MHz band 13 dBm input power at 1 dB input compression point 26 dBm input third-order intercept point 10 dB typical small signal noise figure Integrated active biasing 5 V single supply operation Independent power-down hardware control pins per mixer Low bias current in Power-down mode Matched 50  single-ended RF and LO input impedance ESD protection at all pins www.DataSheet.net/ 3. Applications  Mobile network infrastructure  RF and IF applications  Communication systems and radars  Microwave and broadband  Industrial applications 4. Ordering information Table 1. Ordering information Package Name BGX7220HN HVQFN36 Description plastic thermal enhanced very thin quad flat package; no leads; 36 termi...