SAW Filter
SF2161E
• • • • Low Insertion Loss SAW RF Filter 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Comp...
Description
SF2161E
Low Insertion Loss SAW RF Filter 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS)
Pb
Value
+10 3 -20 to +70 -30 to +85 265
2650 MHz SAW Filter
Units
dBm Volts °C °C °C
Absolute Maximum Ratings Rating
Input Power Level DC Voltage on any Non-ground Terminal Operating Temperture Range Storage Temperature Range in Tape and Reel Maximum Soldering Profile, 5 Cycles/10 seconds Maximum
SM3030-6
Electrical Characteristics Characteristic
Center Frequency Insertion Loss Amplitude Ripple, 2615 to 2685 MHz Attenuation Referenced to 0 dB: DC to 2300 MHz 2300 to 2500 MHz 2800 to 4000 MHz 4000 to 5000 MHz VSWR, 2615 to 2685 MHz Source Impedance Load Impedance Single-Ended Input / Output Impedance Match Case Style Lid Symbolization, Y=year, WW=week, S=shift
Sym
fC IL
Notes
1
Min
Typ
2650 2.0 0.9
Max
3.5 2.5
Units
MHz MHz dBP-P
23.0 25.0 30.0 20.0 ZS ZL
www.DataSheet.net/
27.5 32.0 34.0 32 1.6:1 50 50
dB
2.3:1 Ω Ω
No matching network required for operation at 50 ohms SM3030-6 3 x 3 mm Nominal Footprint 848 YWWS
Electrical Connections
Connection Input Output Ground Terminals 2 5 All others
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analy...
Similar Datasheet