SF1200B

® SF1200B 96.00 MHz Pb Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS) SAW Filter Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Max Soldering Profile Value +10 30 -40 to +85 265°C for 10 s Units dBm VDC °C SMP-03 Electrical Characteristics Characteristic Nominal Center Frequency Passband Bandwidth Insertion Loss Relative attenuation to I.L @ out of pass band (Rejection) Sym fC 86.0-----106.0MHz 0-----68.4MHz 76.8MHz 123.6-----162.8MHz 162.8-----1000MHz 86.0-----106.0MHz 86.0-----106.0MHz 86.0-----106.0MHz 86.0-----106.0MHz IL Notes 1 1, 2 51 40 56 35 Min 20 8 57 45 65 40 0.9 1.2 120 15 40 12 Typ 96 Max Units MHz MHz 1, 3 dB 1.6 150 ns dBm dBm °C Ohm Amplitude Ripple (p-p) Amplitude Ripple (p-p) @ 25°C Group Delay Ripple (p-p) 1dB Commpression Point Input IP3 Operating Temperature Terminating Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 www.DataSheet.net/ 1, 4 1, 4 1, 5 1 1 1 +85 50 SMP-03 7 x 5 mm Nominal Footprint RFM SF1200B YYWWS 12 35 -40 Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measur...