SAW Filter
Preliminary
SF2172C
• • • • Low Insertion Loss 5.0 X 5.0 mm Surface-Mount Case Single Ended Input and Output Complies wi...
Description
Preliminary
SF2172C
Low Insertion Loss 5.0 X 5.0 mm Surface-Mount Case Single Ended Input and Output Complies with Directive 2002/95/EC (RoHS)
Pb
Value
+13 30 -40 to +85 260°C for 30 s
280 MHz SAW Filter
Units
dBm VDC °C
Absolute Maximum Ratings Rating
Maximum Incident Power in Passband Maximum DC Voltage Between any Two Terminals Storage Temperature Range Suitable for Lead-free Soldering - Maximum Soldering Temperature
SM5050-8 Electrical Characteristics Characteristic
Nominal Center Frequency Insertion Loss Passband Ripple, fC ± 7.5 MHz Passband Rippl2, fC ± (7.5 to 8.5) MHz 1 dB Bandwidth Group Delay Deviation, fC ± 7.5 MHz 40 dB Bandwidth Attenuation Referenced to ILMIN Fc ±(15 to 17) MHz Fc ±(17 to 100) MHz Operating Temperature Range Case Style Lid Symbolization (Y=year, WW=week, S=shift)
Sym
fC ILMIN
Notes
1 1 1 1 1
Min
Typ
280 8.8 0.4 0.7 19.8 24 29.5
Max
11 1.0 2.0 50 31.0
Units
MHz dB dBP-P dBP-P MHz ns MHz dB dB °C
BW1
15
www.DataSheet.net/
10 40 40 45 -40 85 SM5050-8 5 x 5 mm Nominal Footprint RFM 852 YWWS
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. 7. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dep...
Similar Datasheet