SAW Filter
SF2131B
• Low Insertion Loss • 5.0 X 7.0 mm Surface-Mount Case • Complies with Directive 2002/95/EC (RoHS) Absolute Maxi...
Description
SF2131B
Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating
Maximum Incident Power in Passband Maximum DC Voltage Between any Two Terminals Storage Temperature Range in Tape and Reel Maximum Soldering Profile
Pb
Value
+10 30 -40 to +85
92.16 MHz SAW Filter
Units
dBm VDC °C
265 °C for 10 s
SMP-03 Electrical Characteristics Characteristic
Nominal Center Frequency 1.5 dB Passband Bandwidth Minimum Insertion Loss 0 to 40.72 MHz 40.72 to 66 MHz 61.44 to 122.88 MHz 109 to 143.6 MHz 143.6 to 153.6 MHz 218 to 1000 MHz 82.16 to 102.16 MHz 82.16 to 102.16 MHz 82.16 to 102.16 MHz
Sym
fC ILMIN
Notes
1 1, 2
Min
20 42 45 52 40 56 58
Typ
92.16 9 50 49.5 56 45 60 63 0.9 65 15 40
Max
Units
MHz MHz dB
10.0
Attenuation Relative to ILMIN
1, 3
dB
Amplitude Ripple Group Delay Ripple 1 dB Compression Point Input IP3 Operating Temperature Range Terminating Source/Load Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4
www.DataSheet.net/
1, 4 1, 4 1, 5 1 1
1.2 100
+85 50 SMP-03 7 x 5 mm Nominal Footprint RFM SF2131B YYWWS
12 35 -40
dBP-P nsP-P dBm dBm °C ohm
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unles...
Similar Datasheet