SAW Filter
• Low Insertion Loss SAW Filter • Balanced 200 ohm Input, Single-ended 50 ohm Output • Complies with Directive 2002/95/E...
Description
Low Insertion Loss SAW Filter Balanced 200 ohm Input, Single-ended 50 ohm Output Complies with Directive 2002/95/EC (RoHS)
RF3702D
426.44 MHz SAW Filter
Value
+20 ±10 -20 to +70 -30 to +85
Pb
Absolute Maximum Ratings Rating
Input Power Level DC Voltage Operating Temperature Range Storage Temperature Range in Tape and Reel
Units
dBm V °C °C
SM3838-8 Electrical Characteristics Characteristic
Center Frequency 3 dB Bandwidth Maximum Insertion Loss, 426.22 to 426.66 MHz Amplitude Ripple, 426.22 to 426.66 MHz Rejection Referenced to 0 dB: 404.64 to 405.44 MHz, [426.44 -(21 to 21.8) MHz] 405.44 to 421.44 MHz 436.44 to 447.84 MHz 470.0 to 770.0 MHz 800.0 to 2010.0 MHz Balanced Source Impedance Load Impedance Case Style Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity Reel Size 7 Inch Reel Size 13 Inch
www.DataSheet.net/
Sym
fC BW3 ILMAX
Notes
Min
1.0
Typ
426.44 2.0 0.6
Max
Units
MHz MHz
3.0 1.0
dB dBP-P
50 30 20 50 40 ZS ZL
54 36 40 59 65 200 50 Ω Ω dB
SM3838-8 3.8 x 3.8 mm Nominal Footprint 948, YWWS 500 Pieces/Reel 3000 Pieces/Reel
Electrical Connections
Connection Balanced Input Output Case Ground Terminals 1,2 5 3, 4, 6, 7, 8
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω...
Similar Datasheet