VNI8200XP

VNI8200XP / VNI8200XP-32 Datasheet Octal high-side smart power solid-state relay with serial/parallel selectable interface on-chip PowerSSO-36 package with exposed pad down (EPD) Product status link VNI8200XP VNI8200XP-32 Product label Features Voltage operating range 10.5 V to 36 V UVLO with hysteresis Output current: 0.7 A or 1.0 A (VNI8200XP or VNI8200XP-32) per channel Low supply current in OFF (1 mA) and ON (5.3 mA) state 5 V and 3.3 V compatible I/Os Selectable interface on logic side SPI or parallel 5 MHz SPI (8 or 16-bits) with output enable, daisy chain and MCU freeze detection 100 mA DC-DC with integrated boot diode and adjustable output voltage 4x2 LED matrix for efficient outputs state LEDs driving Can drive all type (resistive, capacitive, inductive) of loads Per-channel overload and short-circuit protection Per-channel/independent overtemperature protection Fast demagnetization of inductive loads (Vout clamp) Overvoltage protection (VCC clamping) Loss of GND protection Power Good (supply voltage level) diagnostic Common fault open drain output IC warning temperature detection PowerSSO-36 (10.3 x 10.3 mm) package Designed to meet IEC61131-2, IEC61000-4-2, IEC61000-4-4 and IEC61000-4-5 Application Programmable logic control Industrial PC peripheral input/output Numerical control machines Description The VNI8200XP and VNI8200XP-32 are monolithic 8-channel drivers, designed in STMicroelectronics™ VIPower™ technology, i...