LOW EMI CURRENT SENSE HIGH SIDE SWITCH
November, 14th 2010
Automotive grade
AUIR3316(S)
LOW EMI CURRENT SENSE HIGH SIDE SWITCH
Features
Load ...
Description
November, 14th 2010
Automotive grade
AUIR3316(S)
LOW EMI CURRENT SENSE HIGH SIDE SWITCH
Features
Load current feedback Programmable over current shutdown Active clamp ESD protection Input referenced to Vcc Over temperature shutdown Switching time optimized for low EMI Reverse battery protection
Product Summary Rds(on) 7 m max. Vcc op. 6 to 26V Current Ratio 8800 Prog. Ishutdown 10 to 90A Vclamp 40V Packages
Description
The AUIR3316(S) is a fully protected 4 terminals high side switch. The input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified threshold, the output power Mosfet is turned on. When the Vcc - Vin is lower than the specified Vil threshold, the output Mosfet is turned off. A current proportional to the power Mosfet current is sourced to the Ifb pin. Over current shutdown occurs when Vifb-Vin > 4.7V. The current shutdown threshold is adjusted by selecting the proper RIfb. Either over current and over temperature latches off the switch. The device is reset by pulling the input pin high. Other integrated protections (ESD, reverse battery, active clamp) make the switch very rugged in automotive environment.
TO-220 AUIR3316
www.DataSheet.net/
D²Pak Pin 4 and 5 fused AUIR3316S
Typical Connection
Vcc IN Ifb Current feeback Input
On Off
AUIR3316
Battery Out
10k Rifb Logic Ground Power Ground Load
www.irf.com
1
Datasheet pdf - http://www.DataSheet4U.co.kr/
AUIR3316(S)
Qualification Information†
Qualif...
Similar Datasheet