Document
LP150E06 Liquid Crystal Display
Product Specification
SPECIFICATION FOR APPROVAL
( ( ) Preliminary Specification ) Final Specification
Title
BUYER MODEL
15.0” SXGA+ TFT LCD
SUPPLIER *MODEL Suffix
www.DataSheet.net/
LG.Philips LCD Co., Ltd. LP150E06 A3K2
*When you obtain standard approval, please use the above model name without suffix
SIGNATURE
DATE
APPROVED BY J. H. Lee / S.Manager
Signature
/ REVIEWED BY / K.K.Jang / Manager PREPARED BY
/
N.J. Seong / Engineer
Please return 1 copy for your confirmation with your signature and comments.
Product Engineering Dept. LG. Philips LCD Co., Ltd
Ver. 1.0
Jun 16. 2005
1 / 26
Datasheet pdf - http://www.DataSheet4U.co.kr/
LP150E06 Liquid Crystal Display
Product Specification
Contents
No
COVER CONTENTS RECORD OF REVISIONS 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 9-1 9-2 9-3 9-4 9-5 9-6 A GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS ELECTRICAL CHARACTREISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERNECE POWER SEQUENCE OPTICAL SFECIFICATIONS MECHANICAL CHARACTERISTICS RELIABLITY INTERNATIONAL STANDARDS SAFETY EMC PACKING DESIGNATION OF LOT MARK PACKING FORM PRECAUTIONS MOUNTING PRECAUTIONS OPERATING PRECAUTIONS ELECTROSTATIC DISCHARGE CONTROL PRECAUTIONS FOR STRONG LIGHT EXPOSURE STORAGE HANDLING PRECAUTIONS FOR PROTECTION FILM APPENDIX. Enhanced Extended Display Identification Data
www.DataSheet.net/
ITEM
Page
1,2 3 4 5 6 7 6 9 10 10 11 12 13 17 21 22 22 22 23 23 23 24 24 24 25 25 25 25 26
Ver. 1.0
Jun 16. 2005
2 / 26
Datasheet pdf - http://www.DataSheet4U.co.kr/
LP150E06 Liquid Crystal Display
Product Specification
RECORD OF REVISIONS
Revision No Revision Date 1.0 Jun. 16, 2005 Page Final Specification Description Note
www.DataSheet.net/
Ver. 1.0
Jun 16. 2005
3 / 26
Datasheet pdf - http://www.DataSheet4U.co.kr/
LP150E06 Liquid Crystal Display
Product Specification
1. General Description
The LP150E06 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has 15.0 inches diagonally measured active display area with SXGA+ resolution(1050 vertical by 1400 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. The LP150E06 has been designed to apply the interface method that enables low power, high speed, low EMI. The LP150E06 is intended to support applications where thin thickness, low power are critical factors and graphic display are important. In combination with the vertical arrangement of the sub-pixels, the LP150E06 characteristics provide an excellent flat display for office automation products such as Notebook PC.
General Features
Active Screen Size Outline Dimension Pixel Pitch Pixel Format Color Depth Luminance, White Power Consumption Weight Display Operating Mode Surface Treatment Ver. 1.0 15.0 inches(38.1cm) diagonal 317.2(H) x 241.4(V), 5.7(D) mm(Typ.) 0.2175 mm x 0.2175 mm 1400 horiz. By 1050 vert. Pixels RGB strip arrangement 6-bit, 262,144 colors 185 cd/m2(Typ.), 5p average Total 4.8 W (Typ.) ( 1.3W Logic / 3.5W Backlight )
CN1
www.DataSheet.net/
520g(Typ.), 535g(Max.) Transmissive mode, normally white
Hard coating(3H) Anti-glare treatment of the front polarizer
Jun 16. 2005 4 / 26
Datasheet pdf - http://www.DataSheet4U.co.kr/
LP150E06 Liquid Crystal Display
Product Specification
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Table 1. ABSOLUTE MAXIMUM RATINGS
Values Parameter Symbol Min Max 4.0 0.3 50 60 90 90 8.0 Vdc Vdc °C °C %RH %RH kV at 25 ± 5°C at 25 ± 5°C 1 1 1 1 2 VCC GND TOP TST HOP HST VESD 2.7 -0.3 0 -20 10 10 Units Notes
Power Input Voltage-ON Power Input Voltage-OFF Operating Temperature Storage Temperature Operating Ambient Humidity Storage Humidity Electrostatic Durability (ESD)
Note : 1. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature should be 39°C Max, and no condensation of water. 2. Condition 1) Non-operation, 150 -330 , 25 , 40~60%RH 2) I/F Connector pins are subjected. 3) The surface of Metal bezel and LCD are subjected except interface connector.(LCD side) 4) Discharge interval time 1sec, 10 times each place
www.DataSheet.net/
90% 80% 60 60%
Wet Bulb Temperature [
50
Humidity[(%)RH]
]
40 30 40%
Storage
20 10 0
Operation
20% 10%
-20
0
10
20
30
40
50
60
70
80
Dry Bulb Temperature [
]
Ver. 1.0
Jun 16. 2005
5 / 26
Datasheet pdf - http://www.DataSheet4U.co.kr/
LP150E06 Liquid Crystal Displ.