DatasheetsPDF.com

N150P3-L01 Dataheets PDF



Part Number N150P3-L01
Manufacturers CMI MEI
Logo CMI MEI
Description TFT LCD Module
Datasheet N150P3-L01 DatasheetN150P3-L01 Datasheet (PDF)

Engineering Specification Engineering Specification Type 15.0 SXGA+ Color TFT/LCD Module Model Name: N150P3-L01 Document Control Number: OEM I-N150P3-L01-02 www.DataSheet.net/ Note: Specification is subject to change without notice. Consequently it is better to contact International Display Technology before proceeding with the design of your product incorporating this module. September 11,2003 OEM I-N150P3-L01-02 1/28 Datasheet pdf - http://www.DataSheet4U.co.kr/ Engineering Specificati.

  N150P3-L01   N150P3-L01



Document
Engineering Specification Engineering Specification Type 15.0 SXGA+ Color TFT/LCD Module Model Name: N150P3-L01 Document Control Number: OEM I-N150P3-L01-02 www.DataSheet.net/ Note: Specification is subject to change without notice. Consequently it is better to contact International Display Technology before proceeding with the design of your product incorporating this module. September 11,2003 OEM I-N150P3-L01-02 1/28 Datasheet pdf - http://www.DataSheet4U.co.kr/ Engineering Specification i Contents Contents Record of Revision Handling Precautions General Description Characteristics Functional Block Diagram Absolute Maximum Ratings Optical Characteristics Luminance Uniformity Signal Interface Connectors Interface Signal Connector Interface Signal Description Interface Signal Electrical Characteristics Signal Electrical Characteristics for LVDS Receiver LVDS Receiver Internal Circuit Recommended Guidelines for Motherboard PCB Design and Cable Selection Signal for Lamp connector Pixel format image Parameter guide line for CFL Inverter Interface Timings Timing Characteristics Timing Definition Vertical Timing Table Horizontal Timing Table Power Consumption Power ON/OFF Sequence Mechanical Characteristics National Test Lab Requirement www.DataSheet.net/ i ii 1.0 2.0 2.1 2.2 3.0 4.0 4.1 5.0 5.1 5.2 5.3 5.4 5.4.1 5.4.2 5.4.3 5.5 6.0 7.0 8.0 8.1 8.2 8.2.1 8.2.2 9.0 10.0 11.0 12.0 September 11,2003 OEM I-N150P3-L01-02 2/28 Datasheet pdf - http://www.DataSheet4U.co.kr/ Engineering Specification i Record of Revision Date June 27,2003 Document Revision OEM I-N150P3-L01-01 Page All Summary First Edition for customer. September 11,2003 OEM I-N150P3-L01-02 5 7 24 26,27 28 To update Power Consumption Typical Power Consumption CFL Current Max 9.0 Power Consumption Reference Drawings 12.0 National Test Lab Requirement www.DataSheet.net/ September 11,2003 OEM I-N150P3-L01-02 3/28 Datasheet pdf - http://www.DataSheet4U.co.kr/ Engineering Specification 1.0 Handling Precautions ▪ ▪ ▪ ▪ ▪ ▪ ▪ If any signals or power lines deviate from the power on/off sequence, it may cause shorten the life of the LCD module. The LCD panel and the CFL are made of glass and may break or crack if dropped on a hard surface, so please handle them with care. CMOS-ICs are included in the LCD panel. They should be handled with care, to prevent electrostatic discharge. Do not press the reflector sheet at the back of the LCD module to any directions. Do not stick the adhesive tape on the reflector sheet at the back of the LCD module. Please handle care when mount in the system cover. Mechanical damage for lamp cable and for lamp connector may cause safety problems. Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (2.5, IEC60950 or UL60950), or be applied exemption conditions of flammability requirements (4.7.3.4, IEC60950 or UL60950) in an end product. ▪ ▪ ▪ The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (2.4, IEC60950 or UL60950). The fluorescent lamp in the liquid crystal display(LCD) contains mercury. Do not put it in trash that is www.DataSheet.net/ disposed of in landfills. Dispose of it as required by local ordinances or regulations. Never apply detergent or other liquid directly to the screen. ▪ Wipe off water drop immediately. Long contact with water may cause discoloration or spots. ▪ When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth; do not use solvents or abrasives. ▪ Do not touch the front screen surface in your system, even bezel. ▪ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by International Display Technology for any infringements of patents or other right of the third partied which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of International Display Technology or others. ▪ The information contained herein may be changed without prior notice. It is therefore advisable to contact International Display Technology before proceeding with the design of equipment incorporating this product. September 11,2003 OEM I-N150P3-L01-02 4/28 Datasheet pdf - http://www.DataSheet4U.co.kr/ Engineering Specification 2.0 General Description This specification applies to the Type 15.0 Color TFT/LCD Module 'N150P3-L01'. This module is designed for a display unit of notebook style personal computer. The screen format and electrical interface are intended to support the SXGA+(1400(H) x 1050(V)) screen. Support color is native 262K colors (RGB 6-bit data driver). All input signals are LVDS (Low Voltage Differential Signaling) interface compatible. This module does not contain an inverter card for backlight. 2.1 Characteristics The following items are characteristics summary on the t.


N150P2-L06 N150P3-L01 N150P5-L01


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)