P-Channel JFET
P-Channel JFET Switch
CORPORATION
2N5114 – 2N5116
GENERAL DESCRIPTION Ideal for inverting switching or "Virtual Gnd" sw...
Description
P-Channel JFET Switch
CORPORATION
2N5114 – 2N5116
GENERAL DESCRIPTION Ideal for inverting switching or "Virtual Gnd" switching into inverting input of Op. Amp. No driver is required and ±10VAC signals can be handled using only +5V logic (TTL or CMOS). FEATURES ON Resistance Low ID(off)<500pA Switches directly from TTL Logic PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise noted) Gate-Drain or Gate-Source Voltage . . . . . . . . . . . . . . . . . 30V Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature Range . . . . . . . . . . . . . -65oC to +200oC Operating Temperature Range . . . . . . . . . . . -55oC to +200oC Lead Temperature (Soldering, 10sec) . . . . . . . . . . . . . +300oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW Derate above 25oC . . . . . . . . . . . . . . . . . . . . . . . . 3mW/ oC
NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
TO-18
Part
Package
Temperature Range -55oC to +200oC -55oC to +200oC
2N5114-16 Hermetic TO-18 X2N5114-16 Sorted Chips in Carriers
D
5508
G,C
S
SWIT...
Similar Datasheet