Document
www.DataSheet4U.com
Specification for G104SN03 V2
06 / Feb / 04
DataSheet4U.com
DataShe
e
Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –
www.data-modul.de
DataSheet4U.com
DataSheet 4 U .com
www.DataSheet4U.com
Version: 1.0 Total Pages: 28 Date: February 6, 2004
Product Functional Specification
10.4 inch SVGA Color TFT LCD Module Model Name: G104SN03 V.2
DataSheet4U.com
et4U.com
e DataShe
( u ) Preliminary Specification ( ) Final Specification
Note: This Specification is subject to change without notice.
DataSheet4U.com
(C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 2/28
DataSheet4 U .com
www.DataSheet4U.com
I. Contents
1.0 2.0 Handling Precautions General Description 2.1 Display Characteristics 2.2 Functional Block Diagram Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Characteristics Pixel Format Image Power Consumption Interface Timing 8.1 Display Color v.s. Input Data Signal 8.2 Input Signal Timing 8.3 Display Position 5 6
3.0 4.0 5.0
9 10 12
6.0 7.0 8.0
16 17 19
et4U.com
e DataShe
9.0 Backlight Characteristics 23 DataSheet4U.com 10.0 Touch Panel Specification….………………………………………………24 10.1 Operating Condition 10.2 Electrical Characteristic 10.3 Mechanical Characteristic 10.4 Touch Panel Outline Dimension 11.0 Reliability Test Items 12.0 Display Quality 13.0 Packing Dimension 14.0 Mechanical Characteristic 26 26 27 28
DataSheet4U.com
(C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 3/28
DataSheet 4 U .com
www.DataSheet4U.com
II. Record of Revision
Version and Date Page 1.0 Feb. 6, 2004 All
Old description N/A
New Description First Edition for Customers
Remark
et4U.com
e DataShe
DataSheet4U.com
DataSheet4U.com
(C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 4/28
4 U .com DataSheet
www.DataSheet4U.com
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnection from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the interface Connector of the TFT module. 11) After installation of the TFT module into an enclosure, do not twist nor bend the TFT module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the TFT module
DataSheet4U.com 12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
et4U.com
e DataShe
may be damaged.
ordinances or regulations for disposal. 13) Small amount of materials having no flammability grade is used in the LCD module should be supplied by power complied with requirements of Limited Power Source, or be applied exemption. 14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit. Do not connect the CFL in Hazardous Voltage Circuit.
DataSheet4U.com
(C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduction and Redistribution Allowed. G104SN03 V.2 5/28
DataSheet 4 U .com
www.DataSheet4U.com
2.0 General Description
This specification applies to the 10.4 inch color TFT LCD module G104SN03 V.2. This module is designed for General Display. The screen format is intended to support the SVGA (800(H) x 600(V)) screen and 262k colors (RGB 6-bits data driver). All input signals are LVDS interface compatible. The module does not contain an inverter card for backlight.
Features
- SVGA 800(H) x600(V) resolution - 1 CCFL(Cold cathode Fluorescent Lamp) - High contrast ratio, High transmittance ratio - Wide viewing angle - High speed response - Low power consumption - LVDS interface
et4U.com
Applications
Information Appliance Industrial Application
DataSheet4U.com
e DataShe
DataSheet4U.com
(C) Copyright AU Optronics, Inc. 2004 All Right Reserved. No Reproduc.