Document
Ordering number:EN2709
NPN Triple Diffused Planar Silicon Transistor
2SC4219
400V/4A Switching Regulator Applications
Features
· High breakdown voltage, high reliability (VCEO≥400V).
· Fast switching speed (tf=0.1µs typ). · Wide ASO.
· Adoption of MBIT process.
· Suitable for sets whose height is restricted.
Package Dimensions
unit:mm 2049C
[2SC4219]
10.2
4.5 1.3
1.6 0.9
11.0 8.8
20.9 11.5
1.2
9.4
0.8 0.4
Specifications
123 2.55 2.55
2.7
1 : Base 2 : Collector 3 : Emitter SANYO : TO-220MF
Absolute Maximum Ratings at Ta = 25˚C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation
Junction Temperature Storage Temperature
Symbol
VCBO VCEO VEBO
IC ICP IB PC
Tj Tstg
Conditions
PW≤300µs, duty cycle≤10% Tc=25˚C
Ratings 500 400 7 4 8 1.5 1.65 40 150
–55 to +150
Unit V V V A A A W W ˚C ˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings min typ
Collector Cutoff Current Emitter Cutoff Current
DC Current Gain
ICBO IEBO *hFE1 hFE2 hFE3
VCB=400V, IE=0 VEB=5V, IC=0 VCE=5V, IC=0.4A VCE=5V, IC=2A VCE=5V, IC=10mA
15 10 10
* : The hFE1 of the 2SC4219 is classified as follows. When specifying the hFE1 rank, specify two ranks or more in principle.
15 L 30 20 M 40 30 N 50
max 10 10 50
Unit
µA µA
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1598HA (KT)/4138MO, TS No.2709–1/4
Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Gain-Bandwidth Product Output Capacitance Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Collector-to-Emitter Sustain Voltage Turn-ON Time
Storage Time
Fall Time
Switching Time Test Circuit
2SC4219
Symbol
Conditions
VCE(sat) VBE(sat)
fT Cob V(BR)CBO V(BR)CEO V(BR)EBO VCEX(sus) ton
tstg
tf
IC=2A, IB=0.4A
IC=2A, IB=0.4A VCE=10V, IC=0.4A VCB=10V, f=1MHz
IC=1mA, IE=0 IC=5mA, RBE=∞ IE=1mA, IC=0 IC=2A, IB1=0.2A, L=1mH, IB2=–0.8A, clamped IC=3A, IB1=0.6A, IB2=–1.2A, RL=66.6Ω, VCC=200V IC=3A, IB1=0.6A, IB2=–1.2A, RL=66.6Ω, VCC=200V IC=3A, IB1=0.6A, IB2=–1.2A, RL=66.6Ω, VCC=200V
Ratings min typ
20 50 500 400 7 400
max 0.8 1.5
Unit
V V MHz pF V V V V
0.5 µs
2.5 µs
0.3 µs
No.2709–2/4
2SC4219
No.2709–3/4
2SC4219
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herei.