DatasheetsPDF.com

B154EW01-V1 Dataheets PDF



Part Number B154EW01-V1
Manufacturers AUO
Logo AUO
Description WXGA Color TFT LCD
Datasheet B154EW01-V1 DatasheetB154EW01-V1 Datasheet (PDF)

www.DataSheet4U.net Document Version: 6 Date: 2004/10/03 Product Functional Specification 15.4 inch WXGA Color TFT LCD Module Model Name : B154EW01 V1 ( u) Preliminary Specification ( ) Final Specification Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 1/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net I. Contents 1.0 2.0 Handling Precautions General Description 2.1 Chara.

  B154EW01-V1   B154EW01-V1


Document
www.DataSheet4U.net Document Version: 6 Date: 2004/10/03 Product Functional Specification 15.4 inch WXGA Color TFT LCD Module Model Name : B154EW01 V1 ( u) Preliminary Specification ( ) Final Specification Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 1/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net I. Contents 1.0 2.0 Handling Precautions General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 4.0 5.0 Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Characteristics 5.5 Signal for Lamp Connector 6.0 7.0 8.0 Pixel Format Image Parameter Guide Line for CFL Inverter Interface Timings 8.1 Timing Characteristics 8.2 Timing Definition 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 Power Consumption Power ON/OFF Sequence Reliability Test Condition Mechanical Characteristics Shipping Label Format Carton package Shipping package of palletizing sequence Appendix: EDID descriptipn II Record of Revision Version and Date Page 0.1. 2003/12/19 0.2. 2004/01/08 All 5 Old description First Edition for Customer Weight: 580g New Description All Weight: 585g Remark (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 2/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net 5 18 23 0.3 2004/03/15 25 27 0.4 2004/04/28 5 21 21 25 0.5 2004/06/28 31 Physical Size: 344x 222.0 x 6.5 max. IDD current: 600mA typ. CCFL Frequency: 55KHz-65KHz Add surface treatment CCFL Frequency: 50KHz-70KHz Mechanical drawing updated Add description of screw hole length and torque Add carton package description Physical Size: 344x 222.0 x 6.8 max IDD current: 500mA typ. Add IDD current: 600mA max. Mechanical drawing updated Add EDID description 1.0 Handing Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 3/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net 12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. 13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source(2.11, IEC60950 or UL1950), or be applied exemption. 14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit(2.4, IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit. (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 4/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net 2.0 General Description B154EW01 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and backlight system. The screen format is intended to support the WXGA (1280(H) x 800(V)) screen and 262k colors (RGB 6-bits data driver). All input signals are LVDS interface compatible. Inverter card of backlight is not included. B154EW01 V1 is designed for a display unit of notebook style personal computer and industrial machine. . (C) Copyright AU Optronics, Inc. August, 2003 All Rights Reserved. B154EW01 V1 Ver.6 5/34 No Reproduction and Redistribution Allowed. www.DataSheet4U.net 2.1 Display Characteristics The following items are characteristics summary on the table under 25 ℃ condition: ITEMS Unit SPECIFICATIONS Screen Diagona.


B150XN01 B154EW01-V1 B154EW01-V0


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)