DatasheetsPDF.com

B150PG01-V0 Dataheets PDF



Part Number B150PG01-V0
Manufacturers AUO
Logo AUO
Description LCD
Datasheet B150PG01-V0 DatasheetB150PG01-V0 Datasheet (PDF)

Product Functional Specification 15 inch SXGA+ Color TFT LCD Module Model Name : B150PG01 V.0 ( ) Preliminary Specification ( ) Final Specification www.DataSheet.co.kr Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. Datasheet pdf - http://www.DataSheet4U.net/ B150PG01 Ver. 07 1/23 I. Contents 1.0 2.0 Handling Precautions General Description 2.1 Characteristics 2.2 Fu.

  B150PG01-V0   B150PG01-V0


Document
Product Functional Specification 15 inch SXGA+ Color TFT LCD Module Model Name : B150PG01 V.0 ( ) Preliminary Specification ( ) Final Specification www.DataSheet.co.kr Note: This Specification is subject to change without notice. (C) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. Datasheet pdf - http://www.DataSheet4U.net/ B150PG01 Ver. 07 1/23 I. Contents 1.0 2.0 Handling Precautions General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 4.0 5.0 Absolute Maximum Ratings Optical Characteristics Signal Interface 5.1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Characteristics 5.5 Signal for Lamp Connector 6.0 7.0 8.0 Pixel Format Image Parameter Guide Line for CFL Inverter Interface Timings 8.1 Timing Characteristics 8.2 Timing Definition 9.0 10.0 11.0 12.0 Power Consumption Power ON/OFF Sequence Mechanical Characteristics EDID Information www.DataSheet.co.kr II Record of Revision Version and Date Page 0.1. 2001/8/13 0.2 2001/12/12 0.3 2002/3/5 0.3 2002/3/5 0.4 2002/4/23 0.5 2003/2/07 0.6 2003/10/03 0.7 2004/7/28 All 5 8 9 5,8 16 9 20 N/A Lamp off falling time = 0ms Old description First Edition for Customer (Tr, Tf)= (35,15) New Description All (Tr, Tf)= (15,35) Update CIE Update pin assignment Add luminance uniformity Lamp off falling time = 180ms Optical measurement position Add EDID information Remark (C) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. Datasheet pdf - http://www.DataSheet4U.net/ B150PG01 Ver. 07 2/23 1.0 Handing Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. 11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. 12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. 13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source(2.11, IEC60950 or UL1950), or be applied exemption. 14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit(2.4, IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit. www.DataSheet.co.kr (C) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. Datasheet pdf - http://www.DataSheet4U.net/ B150PG01 Ver. 07 3/23 2.0 General Description This specification applies to the 15.0 inch Color TFT/LCD Module B150PG01. This module is designed for a display unit of notebook style personal computer. The screen format is intended to support the SXGA+ (1400(H) x 1050(V)) screen and 262k colors (RGB 6-bits data driver). All input signals are LVDS interface compatible. This module does not contain an inverter card for backlight. www.DataSheet.co.kr (C) Copyright AU Optronics, Inc. August, 2001 All Rights Reserved. No Reproduction and Redistribution Allowed. Datasheet pdf - http://www.DataSheet4U.net/ B150PG01 Ver. 07 4/23 2.1 Display Characteristics The following items are characteristics summary on the table under 25 condition: ITEMS Unit SPECIFICATIONS Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode Typical White (ICFL=6.0mA) Luminance Uniformity Contrast Ratio Optical Rise Time/Fall Time Nominal Input Voltage VDD Typical Power Consumption (VDD line + VCFL line) Weight Physical Size Electrical Interface Support Color Temperature Range Operating Storage (Shipping) [oC] [oC] [msec] [Volt] www.DataSheet.co.kr [mm] [mm] 381 304.5 X 228.375 1400(x.


B141XN04-2 B150PG01-V0 B150PG03-V0


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)