JMB360

JMB360 JMB360 PCI Express to SATA II Host Controller Overview JMB360 is a single chip, one-lane PCI Express to one-port Serial ATA II Host Controller. The JMB360 is designed to provide one-port SATA II connectivity. The JMB360 supports both AHCI and Legacy IDE controller to increase system feasibility, including Native Command Queuing (NCQ), Hot Plugging, ATAPI Device Supporting, Port Multiplier with Command-based Switching Supporting, Programmable Output Swing Control to fit SATA II Gen2i and Gen2m (External SATA Connection, eSATA). It features PCI Express bus and Serial ATA II interface to express high performance storage devices. Feature Compliance Compliant with Serial ATA AHCI (Advanced Host Controller Interface) Spec. Reversion 1.0 Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0 Compliant with PCI Express Base Spec. Revision 1.0a Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1 Compliant with Gen2i and Gen2m Serial ATA II: Electrical Spec. Revision 1.0 Overall Integrated 1-Lane PCI Express PHY and 1-port SATA II PHY Integrated two PLL for both PCI Express bus and SATA II interface Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY Supports up to 64K Byte external flash for BIOS expansion Supports a slave SMBus interface (follow System Management Bus Specification ...