BD63860EFV

1/4 STRUCTURE PRODUCT SERIES TYPE FUNCTION Silicon monolithic integrated circuits Bipolar stepping motor driver BD63860EFV ・PWM constant current controllable two H bridge driver ・Built-in translator circuit for CLK-IN control ・Full, Half, Quarter, and Eighth step modes ・Mixed decay control ○Absolute maximum ratings(Ta=25℃) Item Supply voltage Limit Unit -0.2～+36.0 V ※1 W 1.45 Power dissipation Pd 4.70※2 W Input voltage for control pin VIN -0.2～+7.0 V RNF maximum voltage VRNF 1.0 V Maximum output current IOUT 2.5※3 A/phase Operating temperature range Topr -25～+85 ℃ Storage temperature range Tstg -55～+150 ℃ Junction temperature Tjmax +150 ℃ ※1 70mm×70mm×1.6mm glass epoxy board. Derating in done at 11.6mW/℃ for operating above Ta=25℃. ※2 4-layer recommended board. Derating in done at 37.6mW/℃ for operating above Ta=25℃. ※3 Do not, however exceed Pd, ASO and Tjmax=150℃. www.DataSheet.co.kr Symbol VCC1,2 ○Recommended operating conditions (Ta=-25～+85℃) Item Symbol Min. Supply voltage VCC1,2 16 Output current IOUT ※4 Do not, however exceed Pd, ASO. This product isn’t designed for protection against radioactive rays. Typ. 24 1.5 Max. 28 1.7※4 Unit V A/phase Status of this document The Japanese version of this document is the formal specification. A customer may use this translation version only for a reference to help reading the formal version. If there are any differences in translation version of this document, formal version takes priority. Rev. A Datasheet pdf - htt...