AT76C401

www.DataSheet.co.kr Features SVGA Resolution, Active CMOS Imager Sensor for Highest Quality Images CIF-sized Sub-sample Mode for Easy Video Conferencing Stand-alone Operation – Need Only to Supply One 26.6MHz Clock Ultra-low Fixed Pattern Noise Triple 10-bit ADCs and Column-based CDS for Highest Readout Speed High Fill Factor and Sensitivity without Microlens Distortions Full 10-bit Data Width Digital Interface for Simple, Fast Transfer Easy Register-based Programming of Modes Region of Interest Image Scan Control for Digital Zoom and Metering On-board Color Offset and Gain Control Option for Full Timing and Scan Control through External FPGA Direct Interface to 8- or 16-bit-based Microprocessor Bus Full Power Control – Low-power Viewfinder Mode Internal Timing Mode Only Covered in this Datasheet Description The Atmel AT76C401 is a complete imager system on one IC that has been designed to give high-quality images using an easy interface and simple operation to reduce overall system cost and time-to-market. The core is a pixel array of 1281 x 480 rectangular active pixels with a high physical fill factor of 43% (without micro-lenses). A vertical stripe RGB pastel color filter is used with individual column-correlated double-sampling (CDS) correction circuitry to produce an exceptionally low level of fixed-pattern image noise (FPN). Individual color gain and offset controls followed by a triple 10-bit analog-to-digital converter further ensure an ...