Sealed pushbutton switches
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctiv...
Description
www.DataSheet.co.kr
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications
K Momentary pushbuttons for thick panels K Illuminated or non-illuminated K Tactile feedback K Flat round actuator for optional marking K Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
MATERIALS
Front panel sealing : IP67 according to IEC 60529 Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
Case : thermoplastic UL94-V0 Actuator : polyamide 6/6 Bushing/bezel : polyamide 6/6 Contacts : brass, gold plated Terminal seal : epoxy
Max. current/voltage rating with resistive load : 50mA 12VDC Initial contact resistance : 50 mΩ max. Insulation resistance : 1 GΩ min. at 500VDC Dielectric strength : 1.000 Vrms Electrical life at full load : 500.000 cycles
GENERAL SPECIFICATIONS
Panel thickness : 1,50 mm (.059) min. - 10 mm (.393) max. Total travel : 1,7 mm (.067) +/- 0,3 mm Typical operating force : 4N +/- 2N Mechanical life : 1.000.000 cycles Torque : 1 Nm max. applied to nut Soldering : 300°C max. for 3 seconds
MOUNTING
Panel cut-out
Matrix mounting
Back of panel space requirement
Flat seal
APEM
www.apem.com
1
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
IL series
Sealed pushbutton swit...
Similar Datasheet