Wide Bandwidth JFET Operational Amplifiers
Data Sheet
Low Noise, Low Input Bias Current, Rail-to-Rail Output, JFET Dual Operational Amplifier
ADA4001-2
10375-002...
Description
Data Sheet
Low Noise, Low Input Bias Current, Rail-to-Rail Output, JFET Dual Operational Amplifier
ADA4001-2
10375-002
FEATURES
Low TCVOS: ±5 µV/°C typical Low input bias current: 20 pA typical at VSY = ±15 V Low noise
7.7 nV/√Hz typical at f = 1 kHz 1.2 µV rms at 20 Hz to 20 kHz Low distortion: 0.00006% No phase reversal Rail-to-rail output Unity-gain stable
APPLICATIONS
Instrumentation Medical instruments Multipole filters Precision current measurement Photodiode amplifiers Sensors Audio
PIN CONFIGURATION
OUT A 1
8 V+
–IN A 2 ADA4001-2 7 OUT B
TOP VIEW +IN A 3 (Not to Scale) 6 –IN B
V– 4
5 +IN B
Figure 1. 8-Lead SOIC_N (R Suffix)
GENERAL DESCRIPTION
The ADA4001-2 is a dual channel JFET amplifier that features low input voltage noise and current noise, input bias current, and rail-to-rail output.
The combination of low noise and low input bias current makes this amplifier especially suitable for high impedance sensor amplification. With low noise and fast settling times, the ADA4001-2 provides good accuracy for medical instruments, electronic measurement, and automated test equipment. Unlike many competitive amplifiers, the ADA4001-2 maintains fast settling performance even with substantial capacitive loads, and, unlike many older JFET amplifiers, the ADA4001-2 does not suffer from output phase reversal when input voltages exceed the maximum common-mode voltage range.
With fast slew rate and great stability under capacitive loads, the ADA4001-2 is a good fit for ...
Similar Datasheet