DatasheetsPDF.com

LV8416CB Dataheets PDF



Part Number LV8416CB
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description H-Bridge x 4-channel Motor Driver
Datasheet LV8416CB DatasheetLV8416CB Datasheet (PDF)

www.DataSheet.co.kr Ordering number : ENA1819 Bi-CMOS LSI LV8416CB Overview For DSC, and Cell Phone Camera Modules H-Bridge × 4-channel Motor Driver The LV8416CB is an H-bridge×4-channel motor driver IC and is able to control 4 modes of forward, reverse, brake and standby. This IC housed in a wafer level package (WLP) is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Functions • Saturation drive H-bridge: 4-channels • Various protection circu.

  LV8416CB   LV8416CB


Document
www.DataSheet.co.kr Ordering number : ENA1819 Bi-CMOS LSI LV8416CB Overview For DSC, and Cell Phone Camera Modules H-Bridge × 4-channel Motor Driver The LV8416CB is an H-bridge×4-channel motor driver IC and is able to control 4 modes of forward, reverse, brake and standby. This IC housed in a wafer level package (WLP) is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Functions • Saturation drive H-bridge: 4-channels • Various protection circuits (thermal protection, low voltage malfunction protection) Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Power supply voltage Output peak current Output continuous current Allowable power dissipation Operating temperature Storage temperature z Symbol VCC max IO peak IO max Pd max Topr Tstg Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20% Channels 1 to 4 Mounted on a circuit board* Conditions Ratings 6.0 600 400 1000 -30 to +85 -55 to +150 Unit V mA mA mW °C °C Specified circuit board : 60mm × 60mm × 1.7mm, glass epoxy two-layer board. Recommended Operating Conditions at Ta = 25°C Parameter Power supply voltage range Logic input voltage range Input frequency Symbol VCC op VIN fIN IN1 to 8 Conditions Ratings 2.5 to 5.5 0 to VCC+0.3 to 100 Unit V V kHz Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 81110 SY 20100728-S00004 No.A1819-1/5 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LV8416CB Electrical Characteristics at Ta = 25°C, VCC = 5V Parameter Standby mode current drain VCC current drain Symbol Ist ICC1 ICC2 VCC low-voltage cutoff voltage Low-voltage hysteresis voltage Thermal shutdown temperature Thermal hysteresis width Input pin Logic pin input current IinL IinH Logic input high-level voltage Logic input low-level voltage Input circuit current consumption Motor driver Output on-resistance Ronu Rond Output leakage current Diode forward voltage Turn-on time Turn-off time At the rise time Standing fall time IOleak VD Ton Toff Tr Tf ID = -100mA Time of Input 50% → Output 50% *2 Time of Input 50% → Output 50% Time of Output 10% → 90% Time of Output 90% → 10% 0.4 0.75 0.10 0.15 0.05 0.05 IO = 100mA, upper ON resistance IO = 100mA, lower ON resistance 0.5 0.3 0.75 0.55 1.0 1.2 0.50 0.55 0.20 0.20 Ω Ω μA V μsec μsec μsec μsec Vinh Vinl ICCin VIN = 0V, IN1 to IN8 VIN = 3.3V, IN1 to IN8 IN1 to IN8 IN1 to IN8 VIN = 3.3V, power hit of IN1 to IN8 *1 30 80 8.3 0.5×VCC 0.2×VCC 250 16.5 1.0 33 μA μA V V μA VthVCC VthHIS TSD ΔTSD Design guarantee value * Design guarantee value * IN1 to IN8 = “L” VCC=VIN1 = 3.3V VCC=VIN1 = 5.0V 40 50 2.0 100 160 10 80 100 2.25 150 180 30 Conditions min Ratings typ max 1.0 160 200 2.5 200 200 50 μA μA μA V mV °C °C Unit *1: The input circuit current consumption in CMOS circuit composition of the input steps is generated though it is unquestionable for IC operation when impressing it to VIN voltage that is lower than the VCC voltage. *2: Time from change edge to change edge (0.5×VCC) of control input at output level. It doesn't have an enable pin, and as for this IC, either in the input pin begins and the internal logic begins operation of "High". Therefore, the turn-on time becomes about three microseconds only at the initial motion work of the input terminal "High". Package Dimensions unit : mm (typ) 3401 TOP VIEW 2.47 SIDE VIEW BOTTOM VIEW 1.5 .


LV8415CB LV8416CB LV8417CS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)