DatasheetsPDF.com

LV5695P Dataheets PDF



Part Number LV5695P
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description Multi-Power Supply
Datasheet LV5695P DatasheetLV5695P Datasheet (PDF)

www.DataSheet.co.kr Ordering number : ENA1972A Monolithic Linear IC LV5695P Overview For Car Audio Systems Multi-Power Supply System IC LV5695P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5 systems of voltage regulator pre-driver which a high side switch for external devices. The following protection circuits are integrated: over current protector, overvoltage protector and Thermal Shut Down. Features • Quiescent current 5.

  LV5695P   LV5695P


Document
www.DataSheet.co.kr Ordering number : ENA1972A Monolithic Linear IC LV5695P Overview For Car Audio Systems Multi-Power Supply System IC LV5695P is a multiple voltage regulator for car audio system, which allows reduction of quiescent current. This IC has 5 systems of voltage regulator pre-driver which a high side switch for external devices. The following protection circuits are integrated: over current protector, overvoltage protector and Thermal Shut Down. Features • Quiescent current 50μA (Typ. when only VDD is in operation) • Five channel regulator For VDD: VOUT is 5.0V/3.3V(Operation always), IOmax is 300mA For SWD5V: VOUT is 5.0V, IOmax is 500mA For CD: VOUT is 8.0V, IOmax is 2000mA For illumination: VOUT is 8.5V, IOmax is 500mA For audio systems: VOUT is 8.45V, IOmax is 800mA • Two high side switch: AMP: Voltage difference between input and output is 0.5V, IOmax is 500mA ANT: Voltage difference between input and output is 0.5V, IOmax is 350mA • Over current protector • Overvoltage protector (Without VDD-OUT) Clamp voltage is 28V (typical) • Thermal Shut down 175ºC (typical) • Pch-LDMOS is used for power output block. (Warning) The protector functions only improve the IC’s tolerance and they do not guarantee the safety of the IC if used under the conditions out of safety range or ratings. Use of the IC such as use under over current protection range or thermal shutdown state may degrade the IC’s reliability and eventually damage the IC. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. O2611 SY 20111018-S00003/82411 SY 20110718-S00006 No.A1972-1/13 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LV5695P Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Power supply voltage Power dissipation Conditions VCC max Pd max (*1) IC unit At using Al heat sink (50×50×1.5mm3) At infinity heat sink Peak voltage Operating temperature Storage temperature Junction temperature VCC peak Topr Tstg Tj max Regarding Bias wave, refer to below the pulse. Conditions Ratings 36 1.5 5.6 32.5 50 -40 to +85 -55 to +150 150 Unit V W W W V °C °C °C *1 : Ta ≤ 25°C Recommended Operating range at Ta = 25°C Parameter Power supply voltage rating 1 Power supply voltage rating 2 Power supply voltage rating 3 Conditions VDD output ON, SWD output ON ILM output ON Audio output ON, CD output ON Ratings 7 to 16 10.3 to 16 10 to 16 Unit V V V * VCC1 should be as follows: VCC1>VCC-0.7V Electrical Characteristics at Ta = 25°C(*2), VCC = VCC1=14.4V Parameter Current drain CTRL1/2/3 Input Low input voltage Middle input voltage 1 Middle input voltage 2 High input voltage Input impedance IKVDD input. Low input voltage High input voltage VDD output(5V/3.3V) Output voltage VO11 VO12 Output current Line regulation Load regulation Dropout voltage 1 Dropout voltage 2 Ripple rejection IO1 ΔVOLN1 ΔVOLD1 VDROP1 VDROP1’ RREJ1 VO3 IO3 ΔVOLN3 ΔVOLD3 VDROP3 VDROP3’ RREJ3 VO4 IO4 IO1 = 200mA, IKVDD = VCC1 IO1 = 200mA, IKVDD = GND VO11 ≥ 4.7V, VO12 ≥ 3.1V 7.5V < VCC1 < 16V, IO1 = 200mA 1mA < IO1 < 200mA IO1 = 200mA (VDD output 5V time) IO1 = 100mA (VDD output 5V time) f = 120Hz, IO1 = 200mA IO3 = 650mA VO3 ≥ 8.0V 10V < VCC < 16V, IO3 = 650mA 1mA < IO3 < 650mA IO3 = 650mA IO3 = 200mA f = 120Hz, IO3 = 650mA IO4 = 350mA VO4 ≥ 8.1V 40 30 4.85 3.2 300 30 70 0.8 0.4 40 70 150 1.6 0.8 5.0 3.3 5.15 3.4 V V mA mV mV V V dB VIL2 VIH2 IKVDD V.


LV5693P LV5695P LV5710GP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)