4-Channel BTL Power Amplifier
www.DataSheet.co.kr
Ordering number : ENA1691C
Monolithic Linear IC
LV47017P
Overview
For Car Audio Systems
4-Chann...
Description
www.DataSheet.co.kr
Ordering number : ENA1691C
Monolithic Linear IC
LV47017P
Overview
For Car Audio Systems
4-Channel BTL Power Amplifier
The LV47017P is the IC for 4-channel BTL power amplifier that is developed for car audio system. Pch DMOS in the upper side of the output stage and Nch DMOS in the lower side of the output stage are complimentary. High power and high quality sound are realized by that. This IC incorporate various functions (standby switch, muting function, and various protection circuit) necessary for car audio system. Also, it has a self-diagnosis function.
Functions
High output : PO max = 48W (typical) (VCC = 15.2V, f = 1kHz, JEITA max, RL = 4Ω) : PO max = 28W (typical) (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 4Ω) : PO max = 21W (typical) (VCC = 14.4V, f = 1kHz, THD = 1%, RL = 4Ω) Built-in muting function (pin 22) Built-in Standby switch (pin 4) Built-in Self-diagnosis function (pin 25) : Signal output in case of output offset detection, shorting to VCC, shorting to ground, and load shorting. Electric mirror noise decrease Built-in various protection circuit (shorting to ground, shorting to VCC, load shorting, over voltage and thermal shut down) No external anti-oscillation part necessary. Note 1 : Please do not mistake connection. A wrong connection may produce destruction, deterioration and damage for the IC or equipment. Note 2 : The protective circuit function is provided to temporarily avoid abnormal state such as incorrect output...
Similar Datasheet