LV5213LP

www.DataSheet.co.kr Ordering number : ENA0183A LV5213LP Overview Bi-CMOS LSI 3ch LED Driver This LV5213LP is LED driver for cell phones. Each LED driver gets a constant current controlled. The brilliance control becomes possible by changing the current value that flows to LED by the serial bus control. LV5213LP can achieve various effects of the illumination of a full-color LED display. Functions Three color LED driver circuits. The LED current can be switched independently in 5-bit units (0 to 5mA). Independent on/off control of the three LED drivers (independent control of the 3 RGB colors). Each LED drive current level can be adjusted independently over the serial bus. Miniature package. Thermal shutdown circuit. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage 1 Supply voltage 2 Allowable power dissipation Maximum input current Maximum output current STBY pin voltage Operating temperature Storage temperature Symbol VCC max VDD max Pd max VINB IO max VSTBY Topr Tstg Mounted on the specified board * Conditions Ratings 6.0 6.0 5.5 6.0 12.0 6.0 -30 to +75 -40 to +125 Unit V V W V mA V °C °C The specified board *: 50mm × 40mm × 0.8mm glass epoxy (4-layer circuit board). Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial e...