DatasheetsPDF.com

LV1117NV Dataheets PDF



Part Number LV1117NV
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description Surround Processor IC
Datasheet LV1117NV DatasheetLV1117NV Datasheet (PDF)

www.DataSheet.co.kr Ordering number : ENA1046 Bi-CMOS IC LV1117N/NV Overview Surround Processor ICs for Electronic Volume Control The LV1117N/NV are sound processor ICs developed for use in TV sets. They incorporate the surround processing functions including (AViSS), pseudo stereo function, (L+R) output, and the major functional blocks of an electronic volume control IC. Features • Input function SW (4ch stereo inputs [L, R]). • Line out (through output). • Input gain control (−6dB, −4dB.

  LV1117NV   LV1117NV


Document
www.DataSheet.co.kr Ordering number : ENA1046 Bi-CMOS IC LV1117N/NV Overview Surround Processor ICs for Electronic Volume Control The LV1117N/NV are sound processor ICs developed for use in TV sets. They incorporate the surround processing functions including (AViSS), pseudo stereo function, (L+R) output, and the major functional blocks of an electronic volume control IC. Features • Input function SW (4ch stereo inputs [L, R]). • Line out (through output). • Input gain control (−6dB, −4dB, 0dB, 4dB, 6dB: 5 positions). • AViSS (ON/OFF/6-stage level control). • Tone control (BASS: ±20dB, TREBLE: ±18dB [in 2dB steps]). • Volume control (0dB to −14dB: 1dB step/−14dB to −80dB: 2dB steps/−∞=−82dB). • Balance control. • Through mode/Mute mode. • Pseudo stereo function (ON/OFF/MONO). • L+R output with LPF (Mute + 7-stage level control: 8 positions). • I2C bus control. • Parallel output ports (4pin). * Initial gain of L+R AMP can be controlled by the resistance value of external resistor. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 22008 TI IM 20051207-S00008 No.A1046-1/18 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LV1117N/1117NV Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Allowable power dissipation 1 Allowable power dissipation 2 Operating temperature Storage temperature Symbol VCC max Pd max1 Pd max2 Topr Tstg Ta ≤ 70°C, DIP Ta ≤ 70°C *, SSOP Conditions Ratings 10.5 700 700 -25 to +70 -40 to +125 Unit V mW mW °C °C Note *: Mounted on a specified board: 114.3mm×76.1mm×1.6mm, glass epoxy board Operating Condtions at Ta = 25°C Parameter Recommended supply voltage Operating supply voltage 1 Operating supply voltage 2 Control data “H” level voltage “L” level voltage Pulse width Hold time Operating frequency VIH VIL tφw thold fopg 2.0 to 5.5 0.0 to 1.0 1.0 1.0 100 V V μs μs kHz Symbol VCC VCC opg1 VCC opg2 DIP SSOP Conditions Ratings 9.0 5.0 to 10.0 5.0 to 9.0 Unit V V V Electrical Characteristics at Ta = 25°C, VCC = 9.0V, fin = 1kHz, VIN = 300mVrms = 0dB, RL = 10kΩ (Input=L/Rch-A, Output=L/R-VROUT) Parameter Quiescent current Symbol ICCO VGT VOT THDT VNOT CTT VGF VOM THDM VNOM CTM VOS THDS VNOS VOS THDS VNOS VOS THDS VNOS THD=1% DIN AUDIO DIN AUDIO DIN AUDIO 85 THD=1% DIN AUDIO DIN AUDIO DIN AUDIO 85 -1.6 2.0 Conditions Ratings min typ 48 max Unit mA Total through (Total through mode, Volume control: 0dB) Voltage gain Maximum output voltage Total harmonic distortion Output noise voltage Cross talk -0.6 2.6 0.03 -93 93 0.1 -85 +0.6 dB Vrms % dBV dB Matrix through (Matrix mode, Input gain: 0dB, Volume control: 0dB) Voltage gain Maximum output voltage Total harmonic distortion Output noise voltage Cross talk -1.7 1.5 -0.7 2.0 0.04 -92 91 0.1 -83 +0.7 dB Vrms % dBV dB MONO mode (MONO mode, Input gain: 0dB, Volume control: 0dB) Maximum output voltage Total harmonic distortion Output noise voltage THD=1% DIN AUDIO DIN AUDIO 1.5 2.0 0.04 -92 0.5 -82 Vrms % dBV Surround (Surround mode-A, Input gain: 0dB, Volume control: 0dB) Maximum output voltage Total harmonic distortion Output noise voltage THD=1% DIN AUDIO DIN AUDIO 1.5 2.0 0.2 -90 0.5 -81 Vrms % dBV Pseudo stereo (Pseudo stereo mode, Input gain: 0dB, Volume control: 0dB) Maximum output voltage Total harmonic distortion Output noise voltage THD=1% DIN AUDIO DIN AUDIO 1.5 2.0 0.07 -90 0..


LV1117N LV1117NV LV2282VA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)